- Dump Clearance At Max Raise: 10.47 ft / 3190 mm
- Bucket Capacity - Heaped: 6.02 yd3 / 4.6 m3
- Bucket Capacity - Struck: 5.24 yd3 / 4 m3
- Bucket Width: 10.73 ft / 3270 mm
Published dimensions and weight
John Deere 824K Z-Bar
The John Deere 824K Z-Bar pairs the 6135H, Tier III certified engine (333 hp) with an operating weight near 26.2 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight57783.2 lb26210 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 824K Z-Bar include published bucket capacity of 6.02 yd3 / 4.6 m3, published breakout force of 41678 lb / 185.4 kN, published operating weight of 57783.2 lb / 26210 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.47 ft / 3190 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (6.02 yd3 / 4.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (5.24 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.47 ft3190 mm
Bucket Capacity - Heaped6.02 yd34.6 m3
Bucket Capacity - Struck5.24 yd34 m3
Bucket Width10.73 ft3270 mm
Breakout Force41678 lb185.4 kN
Dimensions
Ground Clearance1.51 ft460 mm
Length With Bucket On Ground30.39 ft9260 mm
Width Over Tires10.06 ft3065 mm
Height To Top Of Cab11.49 ft3500 mm
Wheelbase11.36 ft3460 mm
Hinge Pin - Max Height14.7 ft4480 mm
Reach At Max Lift And Dump4.2 ft1280 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6135H, Tier III certified6135H, Tier III certified
Net Power333 hp248.4 kw
Power Measured @1600 rpm1600 rpm
Max Torque1194 lb ft1618.9 Nm
Displacement824 cu in13.6 L
Torque Measured @900 rpm900 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise59 %59 %
Operational
Operating Weight57783.2 lb26210 kg
Fuel Capacity124.1 gal469.4 L
Hydraulic System Fluid Capacity42.1 gal159 L
Engine Oil Fluid Capacity10.1 gal37.9 L
Cooling System Fluid Capacity12.6 gal47.4 L
Transmission Fluid Capacity7.4 gal27.9 L
Front Axle/Diff Fluid Capacity12.2 gal45.9 L
Rear Axle/Diff Fluid Capacity12.2 gal45.9 L
Static Tipping Weight45212.4 lb20508 kg
Turning Radius19.5 ft5920 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5 R 2526.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse18.8 mph30.1 km/h
Hydraulic System
Relief Valve Setting3650 psi25165.9 kPa
Pump Flow Capacity135.6 gal/min513 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.3 sec1.3 sec
Lower Time2.5 sec2.5 sec
Pump Typetwo variable displacement, load-sensing axial pistontwo variable displacement, load-sensing axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.