- Dump Clearance At Max Raise: 11.91 ft / 3630 mm
- Bucket Capacity - Heaped: 6.02 yd3 / 4.6 m3
- Bucket Capacity - Struck: 5.24 yd3 / 4 m3
- Bucket Width: 10.73 ft / 3270 mm
Published dimensions and weight
John Deere 824K High-Lift
The John Deere 824K High-Lift is a wheel loader of about 25.7 t, powered by a 333 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight56634.6 lb25689 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 824K High-Lift include published bucket capacity of 6.02 yd3 / 4.6 m3, published breakout force of 39570 lb / 176.02 kN, published operating weight of 56634.6 lb / 25689 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (11.91 ft / 3630 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (6.02 yd3 / 4.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (5.24 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise11.91 ft3630 mm
Bucket Capacity - Heaped6.02 yd34.6 m3
Bucket Capacity - Struck5.24 yd34 m3
Bucket Width10.73 ft3270 mm
Breakout Force39570 lb176.02 kN
Dimensions
Ground Clearance1.51 ft460 mm
Length With Bucket On Ground32.06 ft9770 mm
Width Over Tires10.06 ft3065 mm
Height To Top Of Cab11.49 ft3500 mm
Wheelbase11.36 ft3460 mm
Hinge Pin - Max Height15.92 ft4850 mm
Reach At Max Lift And Dump5.35 ft1630 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6135H, Tier III certified6135H, Tier III certified
Net Power333 hp248.4 kw
Power Measured @1600 rpm1600 rpm
Max Torque1194 lb ft1618.9 Nm
Displacement824 cu in13.6 L
Torque Measured @900 rpm900 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise59 %59 %
Operational
Operating Weight56634.6 lb25689 kg
Fuel Capacity124.1 gal469.4 L
Hydraulic System Fluid Capacity42.1 gal159 L
Engine Oil Fluid Capacity10.1 gal37.9 L
Cooling System Fluid Capacity12.6 gal47.4 L
Transmission Fluid Capacity7.4 gal27.9 L
Front Axle/Diff Fluid Capacity12.2 gal45.9 L
Rear Axle/Diff Fluid Capacity12.2 gal45.9 L
Static Tipping Weight37983.5 lb17229 kg
Turning Radius19.5 ft5920 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5 R 2526.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse18.8 mph30.1 km/h
Hydraulic System
Relief Valve Setting3650 psi25165.9 kPa
Pump Flow Capacity135.6 gal/min513 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.3 sec1.3 sec
Lower Time2.6 sec2.6 sec
Pump Typetwo variable displacement, load-sensing axial pistontwo variable displacement, load-sensing axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.