Published dimensions and weight

John Deere 824J Z-Bar

Weighing roughly 26 t and rated at 275 hp, the John Deere 824J Z-Bar is a wheel loader in its size class.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02Operating Weight57374 lb26025 kg

03Selected published values46

Published highlights

Dump Clearance At Max Raise: 10.58 ft / 3230 mm
Breakout Force: 42916 lb / 190.9 kN
Bucket Capacity - Heaped: 6 yd3 / 4.6 m3
Bucket Capacity - Struck: 5.25 yd3 / 4 m3

Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 824J Z-Bar include published bucket capacity of 6 yd3 / 4.6 m3, published breakout force of 42916 lb / 190.9 kN, published operating weight of 57374 lb / 26025 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Dump Clearance At Max Raise” field (10.58 ft / 3230 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Breakout Force” field (42916 lb / 190.9 kN) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Capacity - Heaped” field (6 yd3 / 4.6 m3) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Bucket

Dump Clearance At Max Raise10.58 ft3230 mm

Breakout Force42916 lb190.9 kN

Bucket Capacity - Heaped6 yd34.6 m3

Bucket Capacity - Struck5.25 yd34 m3

Bucket Width10.75 ft3275 mm

Dimensions

Ground Clearance1.5 ft460 mm

Length With Bucket On Ground29.25 ft8920 mm

Height To Top Of Cab11.58 ft3530 mm

Wheelbase11.17 ft3400 mm

Hinge Pin - Max Height14.83 ft4520 mm

Reach At Max Lift And Dump4.08 ft1243 mm

Engine

Number Of Cylinders66

Engine Make22402240

Engine Model6125H6125H

Net Power275 hp205 kw

Power Measured @2000 rpm2000 rpm

Max Torque1115 lb ft1512 Nm

Displacement766 cu in23.6 L

Torque Measured @1200 rpm1200 rpm

AspirationTurbocharged charge air cooledTurbocharged charge air cooled

Torque Rise54 %54 %

Operational

Operating Weight57374 lb26025 kg

Fuel Capacity122 gal462 L

Hydraulic System Fluid Capacity38 gal144 L

Engine Oil Fluid Capacity10.1 gal38 L

Cooling System Fluid Capacity10.1 gal38 L

Transmission Fluid Capacity7.4 gal28 L

Front Axle/Diff Fluid Capacity12.2 gal46 L

Rear Axle/Diff Fluid Capacity12.2 gal46 L

Static Tipping Weight42523 lb19288 kg

Turning Radius20.2 ft6140 mm

Operating Voltage24 V24 V

Alternator Supplied Amperage80 amps80 amps

Rear Axle Oscillation26 degrees26 degrees

Tire Size26.5 R2526.5 R25

Transmission

Transmission TypeAutomatic PowershiftAutomatic Powershift

Number Of Forward Gears44

Number Of Reverse Gears33

Max Speed - Forward24.5 mph39.4 km/h

Max Speed - Reverse19.3 mph31.1 km/h

Hydraulic System

Relief Valve Setting3600 psi24800 kPa

Pump Flow Capacity112 gal/min424 L/min

Raise Time6.1 sec6.1 sec

Dump Time1.5 sec1.5 sec

Lower Time2.8 sec2.8 sec

Pump TypeVariable axial PistonVariable axial Piston

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View John Deere 824J Z-Bar listings Get a valuation for your John Deere 824J Z-Bar Post a want-to-buy request

Manufacturer-published specifications.

John Deere 824J Z-Bar

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other John Deere models