- Dump Clearance At Max Raise: 12 ft / 3660 mm
- Breakout Force: 45258 lb / 201.3 kN
- Bucket Capacity - Heaped: 5.25 yd3 / 4 m3
- Bucket Capacity - Struck: 4.5 yd3 / 3.4 m3
Published dimensions and weight
John Deere 824J High-Lift
The John Deere 824J High-Lift is a wheel loader of about 26 t, built around the 6125H engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight57304 lb25993 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 824J High-Lift include published bucket capacity of 5.25 yd3 / 4 m3, published breakout force of 45258 lb / 201.3 kN, published operating weight of 57304 lb / 25993 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (12 ft / 3660 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (45258 lb / 201.3 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.25 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise12 ft3660 mm
Breakout Force45258 lb201.3 kN
Bucket Capacity - Heaped5.25 yd34 m3
Bucket Capacity - Struck4.5 yd33.4 m3
Bucket Width9.98 ft3040 mm
Dimensions
Ground Clearance1.5 ft460 mm
Length With Bucket On Ground30.42 ft9270 mm
Height To Top Of Cab11.58 ft3530 mm
Wheelbase11.17 ft3400 mm
Hinge Pin - Max Height15.92 ft4850 mm
Reach At Max Lift And Dump4.99 ft1518 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6125H6125H
Net Power275 hp205 kw
Power Measured @2000 rpm2000 rpm
Max Torque1115 lb ft1512 Nm
Displacement766 cu in12.6 L
Torque Measured @1200 rpm1200 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise54 %54 %
Operational
Operating Weight57304 lb25993 kg
Fuel Capacity122 gal462 L
Hydraulic System Fluid Capacity38 gal144 L
Engine Oil Fluid Capacity10.1 gal38 L
Cooling System Fluid Capacity10.1 gal38 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity12.2 gal46 L
Rear Axle/Diff Fluid Capacity12.2 gal46 L
Static Tipping Weight36354 lb16490 kg
Turning Radius20.2 ft6140 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5 R2526.5 R25
Transmission
Transmission TypeAutomatic PowershiftAutomatic Powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.5 mph39.4 km/h
Max Speed - Reverse19.3 mph31.1 km/h
Hydraulic System
Relief Valve Setting3600 psi24800 kPa
Pump Flow Capacity112 gal/min424 L/min
Raise Time6.1 sec6.1 sec
Dump Time1.5 sec1.5 sec
Lower Time2.8 sec2.8 sec
Pump TypeVariable axial PistonVariable axial Piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.