- Dump Clearance At Max Raise: 10.08 ft / 3090 mm
- Bucket Capacity - Heaped: 5.25 yd3 / 4 m3
- Bucket Capacity - Struck: 4.5 yd3 / 3.4 m3
- Bucket Width: 9.98 ft / 3040 mm
Published dimensions and weight
John Deere 744J Z-Bar
The John Deere 744J Z-Bar is a 23.3 t-class wheel loader with a 266 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight51467 lb23345 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 744J Z-Bar include published bucket capacity of 5.25 yd3 / 4 m3, published breakout force of 44526 lb / 198.1 kN, published operating weight of 51467 lb / 23345 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.08 ft / 3090 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.25 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.5 yd3 / 3.4 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.08 ft3090 mm
Bucket Capacity - Heaped5.25 yd34 m3
Bucket Capacity - Struck4.5 yd33.4 m3
Bucket Width9.98 ft3040 mm
Breakout Force44526 lb198.1 kN
Dimensions
Ground Clearance1.5 ft460 mm
Length With Bucket On Ground27.92 ft8510 mm
Width Over Tires9.64 ft2936 mm
Height To Top Of Cab11.58 ft3530 mm
Wheelbase11.17 ft3400 mm
Hinge Pin - Max Height14.08 ft4290 mm
Reach At Max Lift And Dump3.97 ft1210 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6125H6125H
Net Power266 hp198 kw
Power Measured @2000 rpm2000 rpm
Max Torque970 lb ft1315 Nm
Displacement766 cu in12.6 L
Torque Measured @1100 rpm1100 rpm
Aspirationturbocharged charge air cooledturbocharged charge air cooled
Torque Rise40 %40 %
Operational
Operating Weight51467 lb23345 kg
Fuel Capacity122 gal462 L
Hydraulic System Fluid Capacity38 gal144 L
Engine Oil Fluid Capacity10.1 gal38 L
Cooling System Fluid Capacity10.1 gal38 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity12.2 gal46 L
Rear Axle/Diff Fluid Capacity12.2 gal46 L
Static Tipping Weight38978 lb17680 kg
Turning Radius20.2 ft6140 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5 R2526.5 R25
Transmission
Transmission TypeAutomatic PowershiftAutomatic Powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.5 mph39.4 km/h
Max Speed - Reverse19.3 mph31.1 km/h
Hydraulic System
Relief Valve Setting3200 psi22050 kPa
Pump Flow Capacity104 gal/min394 L/min
Raise Time6.5 sec6.5 sec
Dump Time1.5 sec1.5 sec
Lower Time3 sec3 sec
Pump TypeVariable axial pistonVariable axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.