- Dump Clearance At Max Raise: 9.99 ft / 3042 mm
- Bucket Capacity - Heaped: 5.25 yd3 / 4 m3
- Bucket Capacity - Struck: 5 yd3 / 3.8 m3
- Bucket Width: 9.98 ft / 3040 mm
Published dimensions and weight
John Deere 744H
The John Deere 744H is a wheel loader of about 22.8 t; its 6125A engine is rated at 260 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight50298.5 lb22815 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 744H include published bucket capacity of 5.25 yd3 / 4 m3, published breakout force of 37821 lb / 168.24 kN, published operating weight of 50298.5 lb / 22815 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.99 ft / 3042 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.25 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (5 yd3 / 3.8 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.99 ft3042 mm
Bucket Capacity - Heaped5.25 yd34 m3
Bucket Capacity - Struck5 yd33.8 m3
Bucket Width9.98 ft3040 mm
Breakout Force37821 lb168.24 kN
Dimensions
Ground Clearance1.53 ft465 mm
Length With Bucket On Ground28.17 ft8586 mm
Width Over Tires9.65 ft2940 mm
Height To Top Of Cab11.55 ft3520 mm
Wheelbase11.16 ft3400 mm
Hinge Pin - Max Height14.05 ft4281 mm
Reach At Max Lift And Dump4.17 ft1270 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6125A6125A
Net Power260 hp194 kw
Gross Power283 hp211 kw
Power Measured @2000 rpm2000 rpm
Max Torque943 lb ft1280 Nm
Displacement766 cu in12.5 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbocharged and AftercooledTurbocharged and Aftercooled
Torque Rise45 %45 %
Operational
Operating Weight50298.5 lb22815 kg
Fuel Capacity114 gal432 L
Hydraulic System Fluid Capacity38 gal144 L
Engine Oil Fluid Capacity10.1 gal38 L
Cooling System Fluid Capacity11.4 gal43 L
Transmission Fluid Capacity7.4 gal28 L
Front Axle/Diff Fluid Capacity12.2 gal46 L
Rear Axle/Diff Fluid Capacity12.2 gal46 L
Static Tipping Weight37897.5 lb17190 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5-2526.5-25
Transmission
Transmission TypePower ShiftPower Shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.5 mph39.5 km/h
Max Speed - Reverse19.3 mph31 km/h
Hydraulic System
Relief Valve Setting3200 psi22000 kPa
Pump Flow Capacity104 gal/min393 L/min
Raise Time6.6 sec6.6 sec
Dump Time1.5 sec1.5 sec
Lower Time3 sec3 sec
Pump TypePiston PumpPiston Pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.