- Dump Clearance At Max Raise: 9.81 ft / 2988 mm
- Bucket Capacity - Heaped: 5 yd3 / 3.8 m3
- Bucket Capacity - Struck: 4.3 yd3 / 3.3 m3
- Bucket Width: 9.98 ft / 3040 mm
Published dimensions and weight
John Deere 744E
The John Deere 744E pairs the 6101AT engine (250 hp) with an operating weight near 21 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight46310 lb21006 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 744E include published bucket capacity of 5 yd3 / 3.8 m3, published breakout force of 42463 lb / 189 kN, published operating weight of 46310 lb / 21006 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.81 ft / 2988 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5 yd3 / 3.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.3 yd3 / 3.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.81 ft2988 mm
Bucket Capacity - Heaped5 yd33.8 m3
Bucket Capacity - Struck4.3 yd33.3 m3
Bucket Width9.98 ft3040 mm
Breakout Force42463 lb189 kN
Dimensions
Ground Clearance1.69 ft515 mm
Length With Bucket On Ground26.32 ft8020 mm
Width Over Tires9.26 ft2820 mm
Height To Top Of Cab11.62 ft3540 mm
Wheelbase11.16 ft3400 mm
Hinge Pin - Max Height13.65 ft4160 mm
Reach At Max Lift And Dump4.18 ft1272 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6101AT6101AT
Net Power250 hp186.5 kw
Gross Power260 hp193.9 kw
Power Measured @2000 rpm2000 rpm
Max Torque750 lb ft1016.9 Nm
Displacement619 cu in10.2 L
Torque Measured @1700 rpm1700 rpm
AspirationTurbocharged with AftercoolerTurbocharged with Aftercooler
Torque Rise34 %34 %
Operational
Operating Weight46310 lb21006 kg
Fuel Capacity87 gal330 L
Hydraulic System Fluid Capacity42.6 gal161 L
Engine Oil Fluid Capacity8.5 gal32 L
Cooling System Fluid Capacity14.6 gal55 L
Transmission Fluid Capacity10.1 gal38 L
Front Axle/Diff Fluid Capacity8.8 gal33 L
Rear Axle/Diff Fluid Capacity9.3 gal35 L
Static Tipping Weight33755 lb15311 kg
Turning Radius20.2 ft6140 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage50 amps50 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size23.5-2523.5-25
Transmission
Transmission TypePower ShiftPower Shift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward25.8 mph41.6 km/h
Max Speed - Reverse28 mph45.1 km/h
Hydraulic System
Relief Valve Setting3129 psi21573.7 kPa
Pump Flow Capacity82 gal/min310.5 L/min
Raise Time6.4 sec6.4 sec
Dump Time1.5 sec1.5 sec
Lower Time3.5 sec3.5 sec
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.