- Dump Clearance At Max Raise: 9.16 ft / 2790 mm
- Bucket Capacity - Heaped: 4.71 yd3 / 3.6 m3
- Bucket Capacity - Struck: 4.19 yd3 / 3.2 m3
- Bucket Width: 9.98 ft / 3040 mm
Published dimensions and weight
John Deere 724K Z-Bar
The John Deere 724K Z-Bar is a wheel loader of about 19.1 t, built around the 6090H, Tier III certified engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight42174.5 lb19130 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 724K Z-Bar include published bucket capacity of 4.71 yd3 / 3.6 m3, published breakout force of 31742 lb / 141.2 kN, published operating weight of 42174.5 lb / 19130 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.16 ft / 2790 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.71 yd3 / 3.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.19 yd3 / 3.2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.16 ft2790 mm
Bucket Capacity - Heaped4.71 yd33.6 m3
Bucket Capacity - Struck4.19 yd33.2 m3
Bucket Width9.98 ft3040 mm
Breakout Force31742 lb141.2 kN
Dimensions
Ground Clearance1.35 ft410 mm
Length With Bucket On Ground27.37 ft8340 mm
Width Over Tires9.45 ft2880 mm
Height To Top Of Cab11.09 ft3380 mm
Wheelbase10.7 ft3260 mm
Hinge Pin - Max Height13.36 ft4070 mm
Reach At Max Lift And Dump3.71 ft1130 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6090H, Tier III certified6090H, Tier III certified
Net Power264 hp196.9 kw
Power Measured @1800 rpm1800 rpm
Max Torque852 lb ft1155.2 Nm
Displacement548 cu in9 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise36 %36 %
Operational
Operating Weight42174.5 lb19130 kg
Fuel Capacity93 gal352 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity7.4 gal28 L
Cooling System Fluid Capacity9 gal34 L
Transmission Fluid Capacity6.4 gal24 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight36352.1 lb16489 kg
Turning Radius18.6 ft5640 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size23.5 R2523.5 R25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.2 mph35.6 km/h
Max Speed - Reverse15.1 mph24.2 km/h
Hydraulic System
Relief Valve Setting3650 psi25165.9 kPa
Pump Flow Capacity81.9 gal/min310 L/min
Raise Time5.5 sec5.5 sec
Dump Time1.2 sec1.2 sec
Lower Time3 sec3 sec
Pump TypeVariable axial pistonVariable axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.