- Dump Clearance At Max Raise: 9.39 ft / 2860 mm
- Bucket Capacity - Heaped: 3.54 yd3 / 2.7 m3
- Bucket Capacity - Struck: 3.01 yd3 / 2.3 m3
- Bucket Width: 8.83 ft / 2690 mm
Published dimensions and weight
John Deere 624K Z-Bar
The John Deere 624K Z-Bar is a wheel loader of about 15.2 t, powered by a 198 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight33477.2 lb15185 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 624K Z-Bar include published bucket capacity of 3.54 yd3 / 2.7 m3, published breakout force of 28484 lb / 126.71 kN, published operating weight of 33477.2 lb / 15185 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.39 ft / 2860 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.54 yd3 / 2.7 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.01 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.39 ft2860 mm
Bucket Capacity - Heaped3.54 yd32.7 m3
Bucket Capacity - Struck3.01 yd32.3 m3
Bucket Width8.83 ft2690 mm
Breakout Force28484 lb126.71 kN
Dimensions
Ground Clearance1.26 ft384 mm
Length With Bucket On Ground25.46 ft7760 mm
Width Over Tires8.72 ft2657 mm
Height To Top Of Cab10.9 ft3320 mm
Wheelbase10.14 ft3090 mm
Hinge Pin - Max Height12.96 ft3950 mm
Reach At Max Lift And Dump3.35 ft1020 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6068H, Tier III certified6068H, Tier III certified
Net Power198 hp147.7 kw
Power Measured @1800 rpm1800 rpm
Max Torque617 lb ft836.6 Nm
Displacement414 cu in6.8 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise55 %55 %
Operational
Operating Weight33477.2 lb15185 kg
Fuel Capacity93 gal352 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity5.1 gal19 L
Cooling System Fluid Capacity7.2 gal27 L
Transmission Fluid Capacity5.6 gal21 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity4.5 gal17 L
Static Tipping Weight30692.8 lb13922 kg
Turning Radius17.3 ft5270 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R 2520.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.6 mph39.5 km/h
Max Speed - Reverse16 mph25.7 km/h
Hydraulic System
Relief Valve Setting3675 psi25338.3 kPa
Pump Flow Capacity59 gal/min223 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.3 sec1.3 sec
Lower Time2.7 sec2.7 sec
Pump Typevariable displacement, axial pistonvariable displacement, axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.