- Dump Clearance At Max Raise: 8.86 ft / 2700 mm
- Bucket Capacity - Heaped: 3.54 yd3 / 2.7 m3
- Bucket Capacity - Struck: 3.01 yd3 / 2.3 m3
- Bucket Width: 8.83 ft / 2690 mm
Published dimensions and weight
John Deere 624K Powerllel w/Q Coupler
The John Deere 624K Powerllel w/Q Coupler is a wheel loader of about 16.5 t, built around the 6068H, Tier III certified engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight36274.9 lb16454 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 624K Powerllel w/Q Coupler include published bucket capacity of 3.54 yd3 / 2.7 m3, published breakout force of 23719 lb / 105.51 kN, published operating weight of 36274.9 lb / 16454 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.86 ft / 2700 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.54 yd3 / 2.7 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.01 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.86 ft2700 mm
Bucket Capacity - Heaped3.54 yd32.7 m3
Bucket Capacity - Struck3.01 yd32.3 m3
Bucket Width8.83 ft2690 mm
Breakout Force23719 lb105.51 kN
Dimensions
Ground Clearance1.26 ft384 mm
Length With Bucket On Ground26.68 ft8130 mm
Width Over Tires8.72 ft2657 mm
Height To Top Of Cab10.9 ft3320 mm
Wheelbase10.14 ft3090 mm
Hinge Pin - Max Height13.1 ft3990 mm
Reach At Max Lift And Dump4.2 ft1280 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6068H, Tier III certified6068H, Tier III certified
Net Power198 hp147.7 kw
Power Measured @1800 rpm1800 rpm
Max Torque617 lb ft836.6 Nm
Displacement414 cu in6.8 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise55 %55 %
Operational
Operating Weight36274.9 lb16454 kg
Fuel Capacity93 gal352 L
Hydraulic System Fluid Capacity29.1 gal110 L
Engine Oil Fluid Capacity5.1 gal19 L
Cooling System Fluid Capacity7.2 gal27 L
Transmission Fluid Capacity5.6 gal21 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity4.5 gal17 L
Static Tipping Weight23814.4 lb10802 kg
Turning Radius17.3 ft5270 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R 2520.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.6 mph39.5 km/h
Max Speed - Reverse16 mph25.7 km/h
Hydraulic System
Relief Valve Setting3675 psi25338.3 kPa
Pump Flow Capacity59 gal/min223 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.4 sec1.4 sec
Lower Time2.8 sec2.8 sec
Pump Typevariable displacement, axial pistonvariable displacement, axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.