- Dump Clearance At Max Raise: 9.06 ft / 2760 mm
- Bucket Capacity - Heaped: 3.01 yd3 / 2.3 m3
- Bucket Capacity - Struck: 2.62 yd3 / 2 m3
- Bucket Width: 8.34 ft / 2540 mm
Published dimensions and weight
John Deere 544K Z-Bar
The John Deere 544K Z-Bar is a wheel loader of about 12.8 t; its E 6068H, Tier III certified engine is rated at 167 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28263.3 lb12820 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 544K Z-Bar include published bucket capacity of 3.01 yd3 / 2.3 m3, published breakout force of 22672 lb / 100.86 kN, published operating weight of 28263.3 lb / 12820 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.06 ft / 2760 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.01 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.62 yd3 / 2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.06 ft2760 mm
Bucket Capacity - Heaped3.01 yd32.3 m3
Bucket Capacity - Struck2.62 yd32 m3
Bucket Width8.34 ft2540 mm
Breakout Force22672 lb100.86 kN
Dimensions
Ground Clearance1.32 ft400 mm
Length With Bucket On Ground24.38 ft7430 mm
Width Over Tires8.36 ft2546 mm
Height To Top Of Cab10.63 ft3240 mm
Wheelbase9.62 ft2930 mm
Hinge Pin - Max Height12.54 ft3820 mm
Reach At Max Lift And Dump3.25 ft990 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine ModelE 6068H, Tier III certifiedE 6068H, Tier III certified
Net Power167 hp124.6 kw
Power Measured @1900 rpm1900 rpm
Max Torque496 lb ft672.5 Nm
Displacement414 cu in6.8 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise38 %38 %
Operational
Operating Weight28263.3 lb12820 kg
Fuel Capacity85.9 gal325 L
Hydraulic System Fluid Capacity24.1 gal91 L
Engine Oil Fluid Capacity5.1 gal19 L
Cooling System Fluid Capacity6.1 gal23 L
Transmission Fluid Capacity4.9 gal18.5 L
Front Axle/Diff Fluid Capacity4.5 gal17 L
Rear Axle/Diff Fluid Capacity4.5 gal17 L
Static Tipping Weight24021.6 lb10896 kg
Turning Radius16.5 ft5000 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R 2520.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.2 mph35.7 km/h
Max Speed - Reverse15 mph24.1 km/h
Hydraulic System
Relief Valve Setting3650 psi25165.9 kPa
Pump Flow Capacity50 gal/min189 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.2 sec1.2 sec
Lower Time3.2 sec3.2 sec
Pump Typevariable displacement, axial pistonvariable displacement, axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.