- Dump Clearance At Max Raise: 9.09 ft / 2770 mm
- Bucket Capacity - Heaped: 2.75 yd3 / 2.1 m3
- Bucket Capacity - Struck: 2.23 yd3 / 1.7 m3
- Bucket Width: 8.34 ft / 2540 mm
Published dimensions and weight
John Deere 524K Z-Bar
The John Deere 524K Z-Bar is a wheel loader of about 12.3 t; its E 6068H, Tier III certified engine is rated at 146 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27077.2 lb12282 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 524K Z-Bar include published bucket capacity of 2.75 yd3 / 2.1 m3, published breakout force of 20267 lb / 90.16 kN, published operating weight of 27077.2 lb / 12282 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.09 ft / 2770 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.75 yd3 / 2.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.23 yd3 / 1.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.09 ft2770 mm
Bucket Capacity - Heaped2.75 yd32.1 m3
Bucket Capacity - Struck2.23 yd31.7 m3
Bucket Width8.34 ft2540 mm
Breakout Force20267 lb90.16 kN
Dimensions
Ground Clearance1.32 ft400 mm
Length With Bucket On Ground24.09 ft7340 mm
Width Over Tires8.35 ft2545 mm
Height To Top Of Cab10.67 ft3250 mm
Wheelbase9.62 ft2930 mm
Hinge Pin - Max Height12.37 ft3770 mm
Reach At Max Lift And Dump3.22 ft980 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine ModelE 6068H, Tier III certifiedE 6068H, Tier III certified
Net Power146 hp108.9 kw
Power Measured @2000 rpm2000 rpm
Max Torque448 lb ft607.5 Nm
Displacement414 cu in6.8 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise47 %47 %
Operational
Operating Weight27077.2 lb12282 kg
Fuel Capacity85.9 gal325 L
Hydraulic System Fluid Capacity24.1 gal91 L
Engine Oil Fluid Capacity5.1 gal19 L
Cooling System Fluid Capacity6.1 gal23 L
Transmission Fluid Capacity4.9 gal18.5 L
Front Axle/Diff Fluid Capacity4.5 gal17 L
Rear Axle/Diff Fluid Capacity4.5 gal17 L
Static Tipping Weight22681.2 lb10288 kg
Turning Radius16.5 ft5000 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R 2520.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.4 mph36 km/h
Max Speed - Reverse15 mph24.1 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity43.6 gal/min165 L/min
Raise Time6.1 sec6.1 sec
Dump Time1.4 sec1.4 sec
Lower Time3 sec3 sec
Pump Typevariable displacement, axial pistonvariable displacement, axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.