- Dump Clearance At Max Raise: 8.47 ft / 2580 mm
- Bucket Capacity - Heaped: 2.49 yd3 / 1.9 m3
- Bucket Capacity - Struck: 2.1 yd3 / 1.6 m3
- Bucket Width: 8.34 ft / 2540 mm
Published dimensions and weight
John Deere 444K Powerllel w/Q Coupler
The John Deere 444K Powerllel w/Q Coupler is a wheel loader of about 12.1 t; its E 4045H, Tier III certified engine is rated at 128 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight26618.7 lb12074 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 444K Powerllel w/Q Coupler include published bucket capacity of 2.49 yd3 / 1.9 m3, published breakout force of 13352 lb / 59.4 kN, published operating weight of 26618.7 lb / 12074 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.47 ft / 2580 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.49 yd3 / 1.9 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.1 yd3 / 1.6 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.47 ft2580 mm
Bucket Capacity - Heaped2.49 yd31.9 m3
Bucket Capacity - Struck2.1 yd31.6 m3
Bucket Width8.34 ft2540 mm
Breakout Force13352 lb59.4 kN
Dimensions
Ground Clearance1.29 ft393 mm
Length With Bucket On Ground23.46 ft7150 mm
Width Over Tires7.93 ft2415 mm
Height To Top Of Cab10.41 ft3170 mm
Wheelbase9.06 ft2760 mm
Hinge Pin - Max Height12.05 ft3670 mm
Reach At Max Lift And Dump3.75 ft1140 mm
Engine
Number Of Cylinders44
Engine Make22402240
Engine ModelE 4045H, Tier III certifiedE 4045H, Tier III certified
Net Power128 hp95.5 kw
Power Measured @2100 rpm2100 rpm
Max Torque380 lb ft515.3 Nm
Displacement276 cu in4.6 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbocharged charge air cooledTurbocharged charge air cooled
Torque Rise32 %32 %
Operational
Operating Weight26618.7 lb12074 kg
Fuel Capacity64 gal242 L
Hydraulic System Fluid Capacity24.1 gal91 L
Engine Oil Fluid Capacity4.7 gal17.5 L
Cooling System Fluid Capacity5.1 gal19 L
Transmission Fluid Capacity4.9 gal18.5 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight15939.5 lb7230 kg
Turning Radius15.6 ft4740 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5 R 2517.5 R 25
Transmission
Transmission TypeCountershaft, powershiftCountershaft, powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.4 mph36 km/h
Max Speed - Reverse15.8 mph25.3 km/h
Hydraulic System
Relief Valve Setting3600 psi24821.2 kPa
Pump Flow Capacity37 gal/min140 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.1 sec1.1 sec
Lower Time1.9 sec1.9 sec
Pump Typevariable displacement, axial pistonvariable displacement, axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.