Published dimensions and weight

John Deere 444J Z-Bar

The John Deere 444J Z-Bar is a wheel loader of about 11.1 t; its 4045H engine is rated at 119 hp.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02Operating Weight24561 lb11141 kg

03Selected published values46

Published highlights

Dump Clearance At Max Raise: 8.33 ft / 2530 mm
Breakout Force: 18104 lb / 80.5 kN
Bucket Capacity - Heaped: 2.5 yd3 / 1.9 m3
Bucket Capacity - Struck: 2.1 yd3 / 1.6 m3

Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 444J Z-Bar include published bucket capacity of 2.5 yd3 / 1.9 m3, published breakout force of 18104 lb / 80.5 kN, published operating weight of 24561 lb / 11141 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Dump Clearance At Max Raise” field (8.33 ft / 2530 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Breakout Force” field (18104 lb / 80.5 kN) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Capacity - Heaped” field (2.5 yd3 / 1.9 m3) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Bucket

Dump Clearance At Max Raise8.33 ft2530 mm

Breakout Force18104 lb80.5 kN

Bucket Capacity - Heaped2.5 yd31.9 m3

Bucket Capacity - Struck2.1 yd31.6 m3

Bucket Width8.33 ft2538.99 mm

Dimensions

Ground Clearance1.3 ft396 mm

Length With Bucket On Ground23.42 ft7140 mm

Height To Top Of Cab10.42 ft3180 mm

Wheelbase9 ft2740 mm

Hinge Pin - Max Height12 ft3660 mm

Reach At Max Lift And Dump4.17 ft1280 mm

Engine

Number Of Cylinders44

Engine Make22402240

Engine Model4045H4045H

Net Power119 hp89 kw

Power Measured @2200 rpm2200 rpm

Max Torque380 lb ft515 Nm

Displacement276 cu in4.5 L

Torque Measured @1400 rpm1400 rpm

AspirationTurbocharged charge air cooledTurbocharged charge air cooled

Torque Rise32 %32 %

Operational

Operating Weight24561 lb11141 kg

Fuel Capacity65 gal246 L

Hydraulic System Fluid Capacity26 gal97 L

Engine Oil Fluid Capacity4.7 gal17.5 L

Cooling System Fluid Capacity5.1 gal19 L

Transmission Fluid Capacity4.9 gal18.5 L

Front Axle/Diff Fluid Capacity5.9 gal22 L

Rear Axle/Diff Fluid Capacity5.9 gal22 L

Static Tipping Weight20554 lb9323 kg

Turning Radius15.5 ft4700.1 mm

Operating Voltage24 V24 V

Alternator Supplied Amperage80 amps80 amps

Rear Axle Oscillation24 degrees24 degrees

Tire Size17.5 R2517.5 R25

Transmission

Transmission TypeAutomatic / PowershiftAutomatic / Powershift

Number Of Forward Gears44

Number Of Reverse Gears33

Max Speed - Forward23.4 mph37.7 km/h

Max Speed - Reverse15.7 mph25.3 km/h

Hydraulic System

Relief Valve Setting3600 psi24800 kPa

Pump Flow Capacity37 gal/min140 L/min

Raise Time5.5 sec5.5 sec

Dump Time1.1 sec1.1 sec

Lower Time1.9 sec1.9 sec

Pump TypeVariable axial pistonVariable axial piston

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View John Deere 444J Z-Bar listings Get a valuation for your John Deere 444J Z-Bar Post a want-to-buy request

Manufacturer-published specifications.

John Deere 444J Z-Bar

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other John Deere models