- Dump Clearance At Max Raise: 10 ft / 3050 mm
- Breakout Force: 16655 lb / 74.1 kN
- Bucket Capacity - Heaped: 2.5 yd3 / 1.9 m3
- Bucket Capacity - Struck: 2.1 yd3 / 1.61 m3
Published dimensions and weight
John Deere 444J High Lift
The John Deere 444J High Lift is a wheel loader of about 11.3 t; its 4045H engine is rated at 119 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight24809 lb11253 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 444J High Lift include published bucket capacity of 2.5 yd3 / 1.9 m3, published breakout force of 16655 lb / 74.1 kN, published operating weight of 24809 lb / 11253 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10 ft / 3050 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (16655 lb / 74.1 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.5 yd3 / 1.9 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10 ft3050 mm
Breakout Force16655 lb74.1 kN
Bucket Capacity - Heaped2.5 yd31.9 m3
Bucket Capacity - Struck2.1 yd31.61 m3
Bucket Width8.33 ft2538.99 mm
Dimensions
Ground Clearance1.3 ft396 mm
Length With Bucket On Ground23.5 ft7162.8 mm
Height To Top Of Cab10.42 ft3180 mm
Wheelbase9 ft2740 mm
Hinge Pin - Max Height13 ft3960 mm
Reach At Max Lift And Dump3.42 ft1042.42 mm
Engine
Number Of Cylinders44
Engine Make22402240
Engine Model4045H4045H
Net Power119 hp88.8 kw
Power Measured @2200 rpm2200 rpm
Max Torque380 lb ft515 Nm
Displacement276 cu in4.5 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbocharged change air cooledTurbocharged change air cooled
Torque Rise32 %32 %
Operational
Operating Weight24809 lb11253 kg
Fuel Capacity65 gal246 L
Hydraulic System Fluid Capacity26 gal97 L
Engine Oil Fluid Capacity4.7 gal17.5 L
Cooling System Fluid Capacity5.1 gal19 L
Transmission Fluid Capacity4.9 gal18.5 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight17469 lb7924 kg
Turning Radius15.5 ft4700.1 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5 R2517.5 R25
Transmission
Transmission TypeAutomatic PowershiftAutomatic Powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.4 mph37.7 km/h
Max Speed - Reverse15.7 mph25.3 km/h
Hydraulic System
Relief Valve Setting3600 psi24800 kPa
Pump Flow Capacity37 gal/min140 L/min
Raise Time5.5 sec5.5 sec
Dump Time1.1 sec1.1 sec
Lower Time1.9 sec1.9 sec
Pump TypeVariable Axial pistonVariable Axial piston
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.