- Dump Clearance At Max Raise: 9.06 ft / 2761 mm
- Bucket Capacity - Heaped: 2 yd3 / 1.5 m3
- Bucket Capacity - Struck: 1.6 yd3 / 1.2 m3
- Bucket Width: 7.88 ft / 2400 mm
Published dimensions and weight
John Deere 344H
The John Deere 344H is a wheel loader of about 7.7 t; its 4045T engine is rated at 98 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale

01Dimensions referenceLength × width × height
02Operating Weight16876 lb7654.9 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for John Deere 344H include published bucket capacity of 2 yd3 / 1.5 m3, published breakout force of 17529 lb / 77.98 kN, published operating weight of 16876 lb / 7654.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.06 ft / 2761 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2 yd3 / 1.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.6 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.06 ft2761 mm
Bucket Capacity - Heaped2 yd31.5 m3
Bucket Capacity - Struck1.6 yd31.2 m3
Bucket Width7.88 ft2400 mm
Breakout Force17529 lb77.98 kN
Dimensions
Ground Clearance1.25 ft378 mm
Length With Bucket On Ground20.65 ft6294 mm
Width Over Tires7.68 ft2340 mm
Height To Top Of Cab10.05 ft3062 mm
Wheelbase8.54 ft2600 mm
Hinge Pin - Max Height11.96 ft3645 mm
Reach At Max Lift And Dump2.94 ft896 mm
Engine
Number Of Cylinders44
Engine Make22402240
Engine Model4045T4045T
Net Power98 hp73 kw
Gross Power102 hp76 kw
Power Measured @2400 rpm2400 rpm
Max Torque291 lb ft395 Nm
Displacement276 cu in4.5 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbochargedTurbocharged
Operational
Operating Weight16876 lb7654.9 kg
Fuel Capacity37 gal140 L
Hydraulic System Fluid Capacity17.2 gal65 L
Engine Oil Fluid Capacity3.2 gal12 L
Cooling System Fluid Capacity4.5 gal17 L
Front Axle/Diff Fluid Capacity2.8 gal10.4 L
Rear Axle/Diff Fluid Capacity2.8 gal10.4 L
Static Tipping Weight12039.5 lb5461 kg
Turning Radius12.8 ft3900 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5-2517.5-25
Transmission
Transmission Typehydrostatichydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward18 mph29 km/h
Max Speed - Reverse18 mph29 km/h
Hydraulic System
Relief Valve Setting3335 psi22994 kPa
Pump Flow Capacity30 gal/min115 L/min
Raise Time4.4 sec4.4 sec
Dump Time1.4 sec1.4 sec
Lower Time3 sec3 sec
Pump Typegeargear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.