- Overall Length: 35.73 ft / 10889 mm
- Overall Width: 11.01 ft / 3353 mm
- Overall Height: 12.15 ft / 3703 mm
- Wheelbase: 17.15 ft / 5227 mm
Published dimensions and weight
Caterpillar 735
The Caterpillar 735 is an articulated dump truck built around the C15 with ACERT Technology engine (394 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Total Empty66689.9 lb30250 kg
03Selected published values123
Articulated dump trucks are commonly used to haul bulk material across construction, quarry and earthmoving sites. Published rows for Caterpillar 735 include published payload of 72091.16 lb / 32700 kg, published body capacity of 25.77 yd3 / 19.7 m3, published engine power of 413 hp / 308 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (35.73 ft / 10889 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Overall Width” field (11.01 ft / 3353 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Overall Height” field (12.15 ft / 3703 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length35.73 ft10889 mm
Overall Width11.01 ft3353 mm
Overall Height12.15 ft3703 mm
Wheelbase17.15 ft5227 mm
Ground Clearance1.76 ft534 mm
Dump Height22.82 ft6955 mm
Dump Ground Clearance2.09 ft635 mm
Wheel Base Between Back Tires6.4 ft1.96 m
Dump Clearance2 ft0.61 m
Dump
Lower Time7 sec7 sec
Capacity - Heaped25.77 yd319.7 m3
Capacity - Struck19.23 yd314.7 m3
Rated Payload72091.16 lb32700 kg
Raise Time11 sec11 sec
Engine
Number Of Cylinders66
Engine Make22362236
Engine ModelC15 with ACERT TechnologyC15 with ACERT Technology
Gross Power413 hp308 kw
Net Power394 hp293.9 kw
Max Torque1524.6 lb ft2067 Nm
Torque Measured @1200 rpm1200 rpm
AspirationTurbochargedTurbocharged
Displacement926 cu in15.2 L
Bore5.4 in137.2 mm
Stroke6.8 in171.5 mm
EmissionsThe 735 meets Tier 4 Final/Stage IV emission standards.The 735 meets Tier 4 Final/Stage IV emission standards.
Net Power - Iso 9249424 hp316.2 kw
Net Power - Sae J1349419 hp312.5 kw
Gross Power - Sae J1995435 hp324.4 kw
Flywheel Power385 hp287.1 kw
Net Power - Iso 14396429 hp320 kw
Note (1)The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.The references to Tier 4 Final/Stage IV include U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Net Power - Eec 80/1269424 hp316.2 kw
Note (5)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)1614 lb ft2188.3 Nm
Peak Engine Torque Speed1200 rpm1200 rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage IvCat C13 ACERTCat C13 ACERT
Peak Engine Torque Net (Sae J1349)1597 lb ft2165.3 Nm
No Engine De-Rating Below12500 ft3810 m
Operational
Fuel Capacity148 gal560 L
Hydraulic System Fluid Capacity61.6 gal233 L
Cooling System Fluid Capacity21.2 gal80 L
Engine Oil Capacity10.1 gal38 L
Transmission Fluid Capacity19.1 gal72 L
Tire Size26.5R2526.5R25
Transmission
Number Of Forward Gears88
Number Of Reverse Gears11
Max Speed36.3 mph58.3 km/h
Forward - 15.2 mph8.3 km/h
Forward - 27.1 mph11.4 km/h
Forward - 39.6 mph15.4 km/h
Forward - 412.9 mph20.7 km/h
Forward - 517.5 mph28.1 km/h
Forward - 623.5 mph37.8 km/h
Forward - 731.9 mph51.3 km/h
Reverse - 15 mph8 km/h
Reverse - 26.8 mph10.9 km/h
Steering
Lock To Lock4.75 seconds @ 60 rpm4.75 seconds @ 60 rpm
Weights
Center Axle - Empty14087.6 %14087.5393 %
Front Axle - Empty40014 lb18150 kg
Rear Axle - Empty12588.4 lb5710 kg
Front Axle - Loaded48479.7 %48479.6542 %
Center Axle - Loaded45900.3 %45900.2456 %
Rear Axle - Loaded44401.2 lb20140 kg
Total Empty66689.9 lb30250 kg
Total Loaded138781.1 lb62950 kg
Service Refill Capacities
Cooling System25.1 gal95.1 L
Fuel Tank148 gal560.3 L
Def Tank5.3 gal20.1 L
Engine Crankcase10.6 gal40.2 L
Transmission22.5 gal85.2 L
Hydraulic System86.6 gal327.9 L
Final Drives/Differential21.1 gal79.9 L
Output Transfer Gear Box6.3 gal23.9 L
Standards
Cab - FopsSAE J231 JAN81 and ISO 3449-1992 Level IISAE J231 JAN81 and ISO 3449-1992 Level II
Cab - RopsSAE J1040 May 1994 and ISO 3471-1994SAE J1040 May 1994 and ISO 3471-1994
BrakesSAE J/ISO 3450-1998SAE J/ISO 3450-1998
SteeringISO 5010 1992EISO 5010 1992E
Operating Weights
Front Axle - Empty41881 lb18997 kg
Center Axle - Empty14406 lb6534.5 kg
Rear Axle - Empty12919 lb5860 kg
Total - Empty69206 lb31391.4 kg
Front Axle - Rated Load7417 lb3364.3 kg
Center Axle - Rated Load32337 lb14667.9 kg
Rear Axle - Rated Load32337 lb14667.9 kg
Total - Rated Load72091 lb32700 kg
Front Axle - Loaded49298 lb22361.2 kg
Center Axle - Loaded46743 lb21202.3 kg
Rear Axle - Loaded45256 lb20527.8 kg
Total - Loaded141297 lb64091.3 kg
Sound Levels
Interior Cab79 dB(A)79 dB(A)
Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
NoteDimensions are for machines equipped with 750/65 R25 tires.Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Sae Turning Radius294 in7467.6 mm
Turning Dimensions - Clearance Radius318 in8077.2 mm
Turning Dimensions - Inside Radius149 in3784.6 mm
Turning Dimensions - Aisle Width212 in5384.8 mm
Body Capacities
Heaped (Sae 2:1)25.8 yd319.8 m3
Struck19 yd314.6 m3
Tailgate Struck19.9 yd315.3 m3
Tailgate Heaped Sae 2:127.3 yd320.9 m3
Heaped Sae 1:132 yd324.5 m3
Body Hoist
Raise Time11 s11 s
Lower Time7 s7 s
Body Plate Thickness
Front0.4 in7.9 mm
Scow0.6 in14 mm
Side0.5 in12 mm
Base0.6 in14 mm
Front Plate0.3 in7.2 mm
Base Plate0.6 in13 mm
Side Plates0.5 in11 mm
Body Plate
Body Plate TypeHigh strength Brinell HB450 wear resistant steelHigh strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
NoteAn optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes4545
Hydraulic Excavators: 336f/336f Xe - Passes5656
Wheel Loaders: 972m/972m Xe - Passes3434
Wheel Loaders: 966m/966m Xe - Passes44
Wheel Loader: 962m - Passes4545
Wheel Loader: 950m - Passes55
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.