- Breakout Force: 3500 daN
- Bucket Capacity - Heaped: 1.57 yd3 / 1.2 m3
- Dumping Angle, Top: 45 degrees
- Lifting Force: 3500 daN
Published dimensions and weight
Mecalac AX 700
The Mecalac AX 700 pairs the Deutz TD 2.9 L4 engine (68 hp) with an operating weight near 4.7 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10383.8 lb4710 kg
03Selected published values35
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Mecalac AX 700 include published bucket capacity of 1.57 yd3 / 1.2 m3, published breakout force of 3500 daN, published operating weight of 10383.8 lb / 4710 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Breakout Force” field (3500 daN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.57 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Dumping Angle, Top” field (45 degrees) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Breakout Force3500 daN3500 daN
Bucket Capacity - Heaped1.57 yd31.2 m3
Dumping Angle, Top45 degrees45 degrees
Lifting Force3500 daN3500 daN
Payload On Forks, Max. Turned, Frontal4629.71 lb2100 kg
Thrust Force3800 daN3800 daN
Tipping Load Standard Bucket7054.8 lb3200 kg
Dimensions
Ground Clearance1.38 ft420 mm
Length With Bucket On Ground17.34 ft5285 mm
Width Over Tires5.25 ft1600 mm
Height To Top Of Cab8.11 ft2470 mm
Wheelbase6.67 ft2030 mm
Hinge Pin - Max Height10.75 ft3275 mm
Reach At Max Lift And Dump2.56 ft780 mm
Engine
Engine ModelDeutz TD 2.9 L4Deutz TD 2.9 L4
Net Power68 hp50.8 kw
Power Measured @2300 rpm2300 rpm
Max Torque234 Nm234 Nm
Battery100 Ah100 Ah
Torque Measured @1800 rpm1800 rpm
AspirationLow-noise, water-cooled, turbo diesel engineLow-noise, water-cooled, turbo diesel engine
Operational
Operating Weight10383.8 lb4710 kg
Fuel Capacity23 gal87 L
Hydraulic System Fluid Capacity15.9 gal60 L
Front Axle/Diff Fluid Capacity1.6 gal5.9 L
Rear Axle/Diff Fluid Capacity1.8 gal6.8 L
Steering Angle40 degrees40 degrees
Turning Radius12.2 ft3700 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage95 amps95 amps
Rear Axle Oscillation11 degrees11 degrees
Tire Size12.5-1812.5-18
Transmission
Max Speed - Forward12.5 mph20 km/h
Hydraulic System
Pump Flow Capacity16.4 gal/min62 L/min
Pump TypeSingle circuit hydraulics with central gear pumpSingle circuit hydraulics with central gear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.