- Breakout Force: 4900 daN
- Bucket Capacity - Heaped: 2.62 yd3 / 2 m3
- Dumping Angle, Top: 45 degrees
- Lifting Force: 6600 daN
Published dimensions and weight
Mecalac AF 1200
The Mecalac AF 1200 pairs the Deutz TCD 2.9 L4 engine (75 hp) with an operating weight near 6 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight13227.8 lb6000 kg
03Selected published values34
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Mecalac AF 1200 include published bucket capacity of 2.62 yd3 / 2 m3, published breakout force of 4900 daN, published operating weight of 13227.8 lb / 6000 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Breakout Force” field (4900 daN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.62 yd3 / 2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Dumping Angle, Top” field (45 degrees) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Breakout Force4900 daN4900 daN
Bucket Capacity - Heaped2.62 yd32 m3
Dumping Angle, Top45 degrees45 degrees
Lifting Force6600 daN6600 daN
Payload On Forks, Max. Turned, Frontal6327.27 lb2870 kg
Thrust Force4650 daN4650 daN
Tipping Load Standard Bucket9479.88 lb4300 kg
Dimensions
Ground Clearance1.38 ft420 mm
Length With Bucket On Ground19.95 ft6080 mm
Width Over Tires6.76 ft2060 mm
Height To Top Of Cab9.32 ft2840 mm
Wheelbase6.85 ft2085 mm
Hinge Pin - Max Height11.98 ft3650 mm
Reach At Max Lift And Dump2.43 ft740 mm
Engine
Engine ModelDeutz TCD 2.9 L4Deutz TCD 2.9 L4
Net Power75 hp56 kw
Power Measured @2600 rpm2600 rpm
Max Torque300 Nm300 Nm
Battery95 Ah95 Ah
Torque Measured @1600 rpm1600 rpm
AspirationLow-noise, water-cooled, turbo diesel engineLow-noise, water-cooled, turbo diesel engine
Operational
Operating Weight13227.8 lb6000 kg
Fuel Capacity34.4 gal130 L
Hydraulic System Fluid Capacity35.4 gal134 L
Front Axle/Diff Fluid Capacity3 gal11 L
Rear Axle/Diff Fluid Capacity3.2 gal12 L
Steering Angle35 degrees35 degrees
Turning Radius12.2 ft3700 mm
Operating Voltage12 V12 V
Rear Axle Oscillation10 degrees10 degrees
Tire Size16/17-2016/17-20
Transmission
Max Speed - Forward12.5 mph20 km/h
Hydraulic System
Pump Flow Capacity22.2 gal/min84 L/min
Pump TypeSingle circuit hydraulics with central gear pumpSingle circuit hydraulics with central gear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.