- Breakout Force: 4000 daN
- Bucket Capacity - Heaped: 2.1 yd3 / 1.6 m3
- Dumping Angle, Top: 45 degrees
- Lifting Force: 4300 daN
Published dimensions and weight
Mecalac AX 1000
The Mecalac AX 1000 pairs the Deutz TD 2.9 L4 engine (75 hp) with an operating weight near 5.4 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11927.1 lb5410 kg
03Selected published values35
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Mecalac AX 1000 include published bucket capacity of 2.1 yd3 / 1.6 m3, published breakout force of 4000 daN, published operating weight of 11927.1 lb / 5410 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Breakout Force” field (4000 daN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.1 yd3 / 1.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Dumping Angle, Top” field (45 degrees) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Breakout Force4000 daN4000 daN
Bucket Capacity - Heaped2.1 yd31.6 m3
Dumping Angle, Top45 degrees45 degrees
Lifting Force4300 daN4300 daN
Payload On Forks, Max. Turned, Frontal5754.07 lb2610 kg
Thrust Force4100 daN4100 daN
Tipping Load Standard Bucket9038.96 lb4100 kg
Dimensions
Ground Clearance1.37 ft415 mm
Length With Bucket On Ground17.56 ft5350 mm
Width Over Tires5.75 ft1750 mm
Height To Top Of Cab8.01 ft2440 mm
Wheelbase6.67 ft2030 mm
Hinge Pin - Max Height10.73 ft3270 mm
Reach At Max Lift And Dump2.79 ft850 mm
Engine
Engine ModelDeutz TD 2.9 L4Deutz TD 2.9 L4
Net Power75 hp56 kw
Power Measured @2300 rpm2300 rpm
Max Torque260 Nm260 Nm
Battery100 Ah100 Ah
Torque Measured @1800 rpm1800 rpm
AspirationLow-noise, water-cooled, turbo diesel engineLow-noise, water-cooled, turbo diesel engine
Operational
Operating Weight11927.1 lb5410 kg
Fuel Capacity23 gal87 L
Hydraulic System Fluid Capacity15.9 gal60 L
Front Axle/Diff Fluid Capacity1.6 gal5.9 L
Rear Axle/Diff Fluid Capacity1.8 gal6.8 L
Steering Angle40 degrees40 degrees
Turning Radius12.2 ft3700 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage95 amps95 amps
Rear Axle Oscillation11 degrees11 degrees
Tire Size365/70 R 18365/70 R 18
Transmission
Max Speed - Forward12.5 mph20 km/h
Hydraulic System
Pump Flow Capacity16.4 gal/min62 L/min
Pump TypeSingle circuit hydraulics with central gear pumpSingle circuit hydraulics with central gear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.