- Dump Clearance At Max Raise: 10.8 ft / 3291.84 mm
- Arm Length: 10.4 ft / 3169.92 mm
- Breakout Force: 53954.15 lb / 240 kN
- Bucket Capacity - Heaped: 7.8 yd3 / 5.97 m3
Published dimensions and weight
Liebherr L586 XPOWER
Weighing roughly 32.6 t and rated at 349 hp, the Liebherr L586 XPOWER is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight71870 lb32599.7 kg
03Selected published values49
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L586 XPOWER include published bucket capacity of 7.8 yd3 / 5.97 m3, published breakout force of 53954.15 lb / 240 kN, published operating weight of 71870 lb / 32599.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.8 ft / 3291.84 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Arm Length” field (10.4 ft / 3169.92 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (53954.15 lb / 240 kN) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.8 ft3291.84 mm
Arm Length10.4 ft3169.92 mm
Breakout Force53954.15 lb240 kN
Bucket Capacity - Heaped7.8 yd35.97 m3
Bucket Width11.3 ft3444.24 mm
Digging Depth4 ft1219.2 mm
Dimensions
Ground Clearance1.12 ft338.33 mm
Length With Bucket On Ground32.9 ft10027.92 mm
Height To Top Of Cab12.3 ft3749.04 mm
Wheelbase12.1 ft3688.08 mm
Hinge Pin - Max Height15.3 ft4663.44 mm
Reach At Max Lift And Dump4.8 ft1463.04 mm
Electrical System
Alternator28/180 (V/A)28/180 (V/A)
Voltage24 V V24 V V
Starter24/10.5 (V/HP)24/10.5 (V/HP)
Battery2 x 180 Ah2 x 180 Ah
Engine
Fuel InjectionElectronic Common Rail high-pressure injectionElectronic Common Rail high-pressure injection
Number Of Cylinders66
Engine ModelD936 A7D936 A7
Net Power349 hp260.3 kw
Air CleanerDry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr displayDry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display
Gross Power353 hp263.3 kw
Power Measured @1800 rpm1800 rpm
Max Torque1450 lb ft1450 lb ft
Displacement642 cu in10.6 L
Torque Measured @1100 rpm1100 rpm
AspirationWater-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technologyWater-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology
Bore4.8 in122 mm
Stroke6 in150.2 mm
Operational
Operating Weight71870 lb32599.7 kg
Fuel Capacity132 gal499.7 L
Hydraulic System Fluid Capacity55.5 gal210.1 L
Engine Oil Fluid Capacity10.6 gal40.2 L
Cooling System Fluid Capacity19.3 gal73.1 L
Hydraulic Fluid Capacity25.1 gal95.1 L
Front Axle/Diff Fluid Capacity15.9 gal60.2 L
Rear Axle/Diff Fluid Capacity15.9 gal60.2 L
Static Tipping Weight47620 lb21600.1 kg
Turning Radius27.5 ft8382 mm
Tire Size29.5R25 L329.5R25 L3
Transmission
Max Speed - Forward20.5 mph33 km/h
Max Speed - Reverse20.5 mph33 km/h
Hydraulic System
Max Operating Pressure4786 psi4786 psi
Relief Valve Setting4351.2 psi30000 kPa
Pump Flow Capacity108 gal/min408.9 L/min
Raise Time6.5 sec6.5 sec
Dump Time3 sec3 sec
Lower Time4 sec4 sec
Pump Type“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.