- Dump Clearance At Max Raise: 9.1 ft / 2773.68 mm
- Arm Length: 8.5 ft / 2590.81 mm
- Breakout Force: 22480 lb / 100 kN
- Bucket Capacity - Heaped: 2.7 yd3 / 2.07 m3
Published dimensions and weight
Liebherr L526
The Liebherr L526 is a wheel loader of about 11.2 t, built around the 4045HLC07 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight24800 lb11249.1 kg
03Selected published values52
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L526 include published bucket capacity of 2.7 yd3 / 2.07 m3, published breakout force of 22480 lb / 100 kN, published operating weight of 24800 lb / 11249.1 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.1 ft / 2773.68 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Arm Length” field (8.5 ft / 2590.81 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (22480 lb / 100 kN) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.1 ft2773.68 mm
Arm Length8.5 ft2590.81 mm
Breakout Force22480 lb100 kN
Bucket Capacity - Heaped2.7 yd32.07 m3
Bucket Width8.2 ft2499.36 mm
Digging Depth5 ft1524 mm
Dimensions
Ground Clearance1.6 ft487.68 mm
Length With Bucket On Ground25.3 ft7711.44 mm
Height To Top Of Cab10.6 ft3230.88 mm
Wheelbase9.7 ft2956.56 mm
Hinge Pin - Max Height12.8 ft3901.44 mm
Reach At Max Lift And Dump3.1 ft944.88 mm
Electrical System
Alternator24/100 (V/A)24/100 (V/A)
Voltage24 V V24 V V
Starter24/10.5 (V/HP)24/10.5 (V/HP)
Battery2 x 135 Ah2 x 135 Ah
Engine
Fuel InjectionElectronic Common Rail high-pressure injectionElectronic Common Rail high-pressure injection
Number Of Cylinders44
Engine Model4045HLC074045HLC07
Net Power135 hp100.7 kw
Air CleanerDry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr displayDry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display
Gross Power138 hp103 kw
Power Measured @2000 rpm2000 rpm
Max Torque404 lb ft404 lb ft
Displacement275 cu in4.6 L
Torque Measured @1500 rpm1500 rpm
AspirationWater-cooled turbocharged in-line engine with cooled exhaust gas recirculation, exhaust after-treatment with a closed diesel particle filter system and SCR technologyWater-cooled turbocharged in-line engine with cooled exhaust gas recirculation, exhaust after-treatment with a closed diesel particle filter system and SCR technology
Bore4.2 in106 mm
Stroke5 in127 mm
Operational
Operating Weight24800 lb11249.1 kg
Fuel Capacity54.2 gal205.2 L
Hydraulic System Fluid Capacity44.9 gal170 L
Engine Oil Fluid Capacity5.8 gal22 L
Cooling System Fluid Capacity8.2 gal31.1 L
Hydraulic Fluid Capacity25.1 gal95.1 L
Transmission Fluid Capacity0.7 gal2.7 L
Front Axle/Diff Fluid Capacity4.2 gal15.9 L
Rear Axle/Diff Fluid Capacity4.2 gal15.9 L
Static Tipping Weight16975 lb7699.8 kg
Turning Radius19.6 ft5974.1 mm
Tire Size17.5R25 L317.5R25 L3
Transmission
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40.1 km/h
Max Speed - Reverse24.9 mph40.1 km/h
Hydraulic System
Max Operating Pressure4786 psi4786 psi
Relief Valve Setting4351.2 psi30000 kPa
Pump Flow Capacity36 gal/min136.3 L/min
Raise Time5.3 sec5.3 sec
Dump Time2.1 sec2.1 sec
Lower Time3.6 sec3.6 sec
Pump Type“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block“Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.