- Dump Clearance At Max Raise: 9.27 ft / 2825 mm
- Bucket Capacity - Heaped: 1.97 yd3 / 1.5 m3
- Bucket Width: 7.88 ft / 2400 mm
- Breakout Force: 17310.29 lb / 77 kN
Published dimensions and weight
Liebherr L514
The Liebherr L514 pairs the D 504 T engine (98 hp) with an operating weight near 7.7 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight17019.7 lb7720 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L514 include published bucket capacity of 1.97 yd3 / 1.5 m3, published breakout force of 17310.29 lb / 77 kN, published operating weight of 17019.7 lb / 7720 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.27 ft / 2825 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.97 yd3 / 1.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (7.88 ft / 2400 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.27 ft2825 mm
Bucket Capacity - Heaped1.97 yd31.5 m3
Bucket Width7.88 ft2400 mm
Breakout Force17310.29 lb77 kN
Dimensions
Ground Clearance1.27 ft385 mm
Length With Bucket On Ground20.21 ft6160 mm
Height To Top Of Cab9.93 ft3025 mm
Wheelbase8.54 ft2600 mm
Hinge Pin - Max Height12.08 ft3680 mm
Reach At Max Lift And Dump2.74 ft835 mm
Engine
Number Of Cylinders44
Engine Make22452245
Engine ModelD 504 TD 504 T
Gross Power98 hp73.1 kw
Power Measured @2400 rpm2400 rpm
Max Torque291.4 lb ft395 Nm
Displacement274.7 cu in4.5 L
Torque Measured @1400 rpm1400 rpm
AspirationInline engine, water-cooled exhaust-turbo chargedInline engine, water-cooled exhaust-turbo charged
Operational
Operating Weight17019.7 lb7720 kg
Fuel Capacity37 gal140 L
Hydraulic System Fluid Capacity27.8 gal105 L
Engine Oil Fluid Capacity3.6 gal13.3 L
Front Axle/Diff Fluid Capacity3.4 gal12.5 L
Rear Axle/Diff Fluid Capacity0.2 gal0.8 L
Static Tipping Weight12511.3 lb5675 kg
Turning Radius14.6 ft4445 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation12 degrees12 degrees
Tire Size15.5R25 or 17.5R2515.5R25 or 17.5R25
Transmission
Transmission TypeStepless hydrostatic travel driveStepless hydrostatic travel drive
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward18.7 mph30 km/h
Max Speed - Reverse18.7 mph30 km/h
Hydraulic System
Relief Valve Setting3335.9 psi23000 kPa
Pump Flow Capacity30.4 gal/min115 L/min
Raise Time4.5 sec4.5 sec
Dump Time1.5 sec1.5 sec
Lower Time3 sec3 sec
Pump TypeGear pumpGear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.