- Dump Clearance At Max Raise: 10.83 ft / 3300 mm
- Bucket Capacity - Heaped: 5.89 yd3 / 4.5 m3
- Bucket Width: 9.85 ft / 3000 mm
- Breakout Force: 39341.57 lb / 175 kN
Published dimensions and weight
Liebherr L574 2plus2
The Liebherr L574 2plus2 is a wheel loader of about 24.3 t; its D 926 TI-E A2 engine is rated at 265 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight53462.2 lb24250 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L574 2plus2 include published bucket capacity of 5.89 yd3 / 4.5 m3, published breakout force of 39341.57 lb / 175 kN, published operating weight of 53462.2 lb / 24250 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.83 ft / 3300 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.89 yd3 / 4.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (9.85 ft / 3000 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.83 ft3300 mm
Bucket Capacity - Heaped5.89 yd34.5 m3
Bucket Width9.85 ft3000 mm
Breakout Force39341.57 lb175 kN
Dimensions
Ground Clearance1.81 ft550 mm
Length With Bucket On Ground29.47 ft8980 mm
Height To Top Of Cab11.62 ft3540 mm
Wheelbase11.32 ft3450 mm
Hinge Pin - Max Height14.98 ft4565 mm
Reach At Max Lift And Dump4.17 ft1270 mm
Engine
Number Of Cylinders66
Engine Make22452245
Engine ModelD 926 TI-E A2D 926 TI-E A2
Gross Power265 hp197.7 kw
Power Measured @2000 rpm2000 rpm
Max Torque947.8 lb ft1285 Nm
Displacement607.8 cu in10 L
Torque Measured @1200 rpm1200 rpm
AspirationInline engine, water-cooled exhaust-turbo charged with intercoolerInline engine, water-cooled exhaust-turbo charged with intercooler
Operational
Operating Weight53462.2 lb24250 kg
Fuel Capacity87.2 gal330 L
Hydraulic System Fluid Capacity63.5 gal240 L
Engine Oil Fluid Capacity6.3 gal23.5 L
Front Axle/Diff Fluid Capacity13.5 gal51 L
Rear Axle/Diff Fluid Capacity13.5 gal51 L
Static Tipping Weight40454.9 lb18350 kg
Turning Radius23.3 ft7090 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5 R 2526.5 R 25
Transmission
Transmission TypeStepless hydrostatic travel drive 2plus2Stepless hydrostatic travel drive 2plus2
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse24.9 mph40 km/h
Hydraulic System
Relief Valve Setting5076.4 psi35000 kPa
Pump Flow Capacity76.7 gal/min290 L/min
Raise Time5.6 sec5.6 sec
Dump Time2 sec2 sec
Lower Time3.5 sec3.5 sec
Pump TypeLoad-sensing, variable axial piston pump with output control and pressure cutoffLoad-sensing, variable axial piston pump with output control and pressure cutoff
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.