- Dump Clearance At Max Raise: 10.13 ft / 3085 mm
- Bucket Capacity - Heaped: 4.58 yd3 / 3.5 m3
- Bucket Width: 8.86 ft / 2700 mm
- Breakout Force: 29225.17 lb / 130 kN
Published dimensions and weight
Liebherr L554 2plus2
The Liebherr L554 2plus2 is a wheel loader of about 17.3 t, built around the D 924 TI-E A2 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight38140 lb17300 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L554 2plus2 include published bucket capacity of 4.58 yd3 / 3.5 m3, published breakout force of 29225.17 lb / 130 kN, published operating weight of 38140 lb / 17300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.13 ft / 3085 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.58 yd3 / 3.5 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (8.86 ft / 2700 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.13 ft3085 mm
Bucket Capacity - Heaped4.58 yd33.5 m3
Bucket Width8.86 ft2700 mm
Breakout Force29225.17 lb130 kN
Dimensions
Ground Clearance1.74 ft530 mm
Length With Bucket On Ground26.68 ft8130 mm
Height To Top Of Cab11.01 ft3355 mm
Wheelbase10.34 ft3150 mm
Hinge Pin - Max Height13.72 ft4180 mm
Reach At Max Lift And Dump3.52 ft1070 mm
Engine
Number Of Cylinders44
Engine Make22452245
Engine ModelD 924 TI-E A2D 924 TI-E A2
Gross Power198 hp147.7 kw
Power Measured @2000 rpm2000 rpm
Max Torque591.6 lb ft802 Nm
Displacement405.2 cu in6.7 L
Torque Measured @1200 rpm1200 rpm
AspirationInline engine, water-cooled exhaust-turbo charged with intercoolerInline engine, water-cooled exhaust-turbo charged with intercooler
Operational
Operating Weight38140 lb17300 kg
Fuel Capacity68.7 gal260 L
Hydraulic System Fluid Capacity58.2 gal220 L
Engine Oil Fluid Capacity5.5 gal20.5 L
Front Axle/Diff Fluid Capacity13.5 gal51 L
Rear Axle/Diff Fluid Capacity7.4 gal28 L
Static Tipping Weight30699.4 lb13925 kg
Turning Radius20.9 ft6360 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size23.5 R 2523.5 R 25
Transmission
Transmission TypeStepless hydrostatic travel drive 2plus2Stepless hydrostatic travel drive 2plus2
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse24.9 mph40 km/h
Hydraulic System
Relief Valve Setting4786.3 psi33000 kPa
Pump Flow Capacity60.8 gal/min230 L/min
Raise Time5.5 sec5.5 sec
Dump Time2.3 sec2.3 sec
Lower Time2.7 sec2.7 sec
Pump TypeLoad-sensing variable axial piston pump with output control and pressure cutoffLoad-sensing variable axial piston pump with output control and pressure cutoff
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.