- Dump Clearance At Max Raise: 9.34 ft / 2845 mm
- Breakout Force: _ - / 105 kN
- Bucket Capacity - Heaped: 3.54 yd3 / 2.7 m3
- Bucket Width: 8.21 ft / 2500 mm
Published dimensions and weight
Liebherr L542 2plus1
The Liebherr L542 2plus1 is a wheel loader of about 13 t, built around the D 934 S AG engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28750 lb13040.8 kg
03Selected published values40
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Liebherr L542 2plus1 include published bucket capacity of 3.54 yd3 / 2.7 m3, published breakout force of 105 kN, published operating weight of 28750 lb / 13040.8 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.34 ft / 2845 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (_ - / 105 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.54 yd3 / 2.7 m3) with the specific machine's configuration and records; options and condition can differ.
What changes with this option
Compared with the base Liebherr L542: 29 of 35 published specifications change.
| Section | Specification | Liebherr L542 | Liebherr L542 2plus1 |
|---|---|---|---|
| Bucket | Dump Clearance At Max Raise | 8.1 ft / 2468.88 mm | 9.34 ft / 2845 mm |
| Bucket | Breakout Force | 24054.56 lb / 107 kN | _ - / 105 kN |
| Bucket | Bucket Capacity - Heaped | 3.7 yd3 / 2.83 m3 | 3.54 yd3 / 2.7 m3 |
| Bucket | Bucket Width | 8.2 ft / 2499.36 mm | 8.21 ft / 2500 mm |
| Dimensions | Ground Clearance | 1.7 ft / 518.16 mm | 1.61 ft / 490 mm |
| Dimensions | Length With Bucket On Ground | 24.1 ft / 7345.68 mm | 23.71 ft / 7225 mm |
| Dimensions | Height To Top Of Cab | 10.8 ft / 3291.84 mm | 10.67 ft / 3250 mm |
| Dimensions | Wheelbase | 9.9 ft / 3017.52 mm | 9.77 ft / 2975 mm |
| Dimensions | Hinge Pin - Max Height | 12.9 ft / 3931.92 mm | 12.9 ft / 3930 mm |
| Engine | Engine Model | 4045HFL93 / 4045HFL93 | D 934 S AG / D 934 S AG |
| Engine | Gross Power | 161 hp / 120.1 kw | 140.9 hp / 105 kw |
| Engine | Max Torque | 476 lb ft / 476 lb ft | 568 lb ft / 770 Nm |
| Engine | Displacement | 275 cu in / 4.6 L | 388.2 cu in / 6.4 L |
| Engine | Torque Measured @ | 1600 rpm / 1600 rpm | 1300 rpm / 1300 rpm |
| Engine | Aspiration | Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter / Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter | turbo-charged / turbo-charged |
| Operational | Operating Weight | 29540 lb / 13399.2 kg | 28750 lb / 13040.8 kg |
| Operational | Fuel Capacity | 54.2 gal / 205.2 L | 45 gal / 170 L |
| Operational | Hydraulic System Fluid Capacity | 47.6 gal / 180.2 L | 47.6 gal / 180 L |
| Operational | Engine Oil Fluid Capacity | 5.4 gal / 20.5 L | 7.7 gal / 29 L |
| Operational | Front Axle/Diff Fluid Capacity | 4.3 gal / 16.3 L | 4.4 gal / 16.3 L |
| Operational | Rear Axle/Diff Fluid Capacity | 4 gal / 15.2 L | 4 gal / 15 L |
| Operational | Static Tipping Weight | 22485 lb / 10199.1 kg | 21525 lb / 11040 kg |
| Operational | Tire Size | 20.5R25 L3 / 20.5R25 L3 | 20.5R25 / 20.5R25 |
| Transmission | Max Speed - Forward | 24.9 mph / 40.1 km/h | 24.9 mph / 40 km/h |
| Transmission | Max Speed - Reverse | 24.9 mph / 40.1 km/h | 24.9 mph / 40 km/h |
| Hydraulic System | Relief Valve Setting | 4351.2 psi / 30000 kPa | 4786.3 psi / 33000 kPa |
| Hydraulic System | Pump Flow Capacity | 45 gal/min / 170.4 L/min | 37 gal/min / 140 L/min |
| Hydraulic System | Raise Time | 5.3 sec / 5.3 sec | 5.9 sec / 5.9 sec |
| Hydraulic System | Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block / “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block / Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
Published only for this option
| Section | Specification | Imperial | Metric |
|---|---|---|---|
| Engine | Engine Make | 2245 | 2245 |
| Operational | Operating Voltage | 24 V | 24 V |
| Operational | Alternator Supplied Amperage | 80 amps | 80 amps |
| Operational | Rear Axle Oscillation | 12 degrees | 12 degrees |
| Transmission | Transmission Type | hydrostatic | hydrostatic |
Not published for this option: Arm Length, Digging Depth, Reach At Max Lift And Dump, Alternator, Voltage, Starter, Battery, Fuel Injection, Air Cleaner, Bore, Stroke, Cooling System Fluid Capacity, Hydraulic Fluid Capacity, Transmission Fluid Capacity, Turning Radius, Max Operating Pressure
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.