- Dump Clearance At Max Raise: 11.72 ft / 3570 mm
- Bucket Capacity - Heaped: 5.24 yd3 / 4 m3
- Bucket Capacity - Struck: 4.52 yd3 / 3.45 m3
- Bucket Width: 10.18 ft / 3100 mm
Published dimensions and weight
Hyundai HL770XTD-7
The Hyundai HL770XTD-7 is a wheel loader of about 23.6 t, built around the QSC8.3-C engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight51918.9 lb23550 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Hyundai HL770XTD-7 include published bucket capacity of 5.24 yd3 / 4 m3, published breakout force of 45040 lb / 200.35 kN, published operating weight of 51918.9 lb / 23550 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (11.72 ft / 3570 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.24 yd3 / 4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.52 yd3 / 3.45 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise11.72 ft3570 mm
Bucket Capacity - Heaped5.24 yd34 m3
Bucket Capacity - Struck4.52 yd33.45 m3
Bucket Width10.18 ft3100 mm
Breakout Force45040 lb200.35 kN
Dimensions
Ground Clearance1.58 ft480 mm
Length With Bucket On Ground29.86 ft9100 mm
Width Over Tires9.77 ft2975 mm
Height To Top Of Cab11.65 ft3550 mm
Wheelbase11.29 ft3440 mm
Hinge Pin - Max Height15.62 ft4760 mm
Reach At Max Lift And Dump4.14 ft1260 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSC8.3-CQSC8.3-C
Net Power266 hp198.4 kw
Gross Power280 hp208.8 kw
Power Measured @2200 rpm2200 rpm
Max Torque1000 lb ft1355.9 Nm
Displacement506.5 cu in8.3 L
Torque Measured @1400 rpm1400 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight51918.9 lb23550 kg
Fuel Capacity113.6 gal430 L
Hydraulic System Fluid Capacity84.6 gal320 L
Engine Oil Fluid Capacity5.3 gal20 L
Cooling System Fluid Capacity14.8 gal56 L
Transmission Fluid Capacity13.8 gal52 L
Front Axle/Diff Fluid Capacity20.7 gal78 L
Rear Axle/Diff Fluid Capacity14.1 gal53 L
Static Tipping Weight34130 lb15481.2 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation26 degrees26 degrees
Tire Size26.5-25 20PR L326.5-25 20PR L3
Transmission
Transmission Typefully automatic power shiftfully automatic power shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.7 mph38 km/h
Max Speed - Reverse16.4 mph26.3 km/h
Hydraulic System
Relief Valve Setting2990 psi20615.4 kPa
Pump Flow Capacity108.6 gal/min411 L/min
Raise Time5.7 sec5.7 sec
Dump Time1.4 sec1.4 sec
Lower Time2.8 sec2.8 sec
Pump Typeopen-centered, tandem circuit systemopen-centered, tandem circuit system
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.