- Dump Clearance At Max Raise: 9.57 ft / 2915 mm
- Bucket Capacity - Heaped: 2.62 yd3 / 2 m3
- Bucket Capacity - Struck: 2.23 yd3 / 1.7 m3
- Bucket Width: 8.37 ft / 2550 mm
Published dimensions and weight
Hyundai HL740TM-7
The Hyundai HL740TM-7 is a wheel loader of about 12.1 t; its QSB5.9-C engine is rated at 140 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight26565.8 lb12050 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Hyundai HL740TM-7 include published bucket capacity of 2.62 yd3 / 2 m3, published breakout force of 23480 lb / 104.45 kN, published operating weight of 26565.8 lb / 12050 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.57 ft / 2915 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.62 yd3 / 2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.23 yd3 / 1.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.57 ft2915 mm
Bucket Capacity - Heaped2.62 yd32 m3
Bucket Capacity - Struck2.23 yd31.7 m3
Bucket Width8.37 ft2550 mm
Breakout Force23480 lb104.45 kN
Dimensions
Ground Clearance1.37 ft417 mm
Length With Bucket On Ground24.78 ft7550 mm
Width Over Tires8.37 ft2550 mm
Height To Top Of Cab10.7 ft3260 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height13.1 ft3990 mm
Reach At Max Lift And Dump4.19 ft1275 mm
Engine
Engine Make23472347
Engine ModelQSB5.9-CQSB5.9-C
Net Power140 hp104.4 kw
Gross Power133 hp99.2 kw
Power Measured @2200 rpm2200 rpm
Max Torque434 lb ft588.5 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight26565.8 lb12050 kg
Fuel Capacity60.3 gal228 L
Hydraulic System Fluid Capacity43.6 gal165 L
Engine Oil Fluid Capacity4.3 gal16 L
Cooling System Fluid Capacity9.3 gal35 L
Transmission Fluid Capacity6.4 gal24 L
Front Axle/Diff Fluid Capacity5.7 gal21.2 L
Rear Axle/Diff Fluid Capacity5.7 gal21.2 L
Static Tipping Weight17530 lb7951.5 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5-25 16 PR, L320.5-25 16 PR, L3
Transmission
Transmission Type3-elements, single-stage single phase3-elements, single-stage single phase
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.8 mph38.2 km/h
Max Speed - Reverse15.8 mph25.3 km/h
Hydraulic System
Relief Valve Setting3130 psi21580.6 kPa
Pump Flow Capacity46.8 gal/min177 L/min
Raise Time5.5 sec5.5 sec
Dump Time1.4 sec1.4 sec
Lower Time2.8 sec2.8 sec
Pump Typeopen-centered, tandem circuit systemopen-centered, tandem circuit system
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.