- Dump Clearance At Max Raise: 9.36 ft / 2850 mm
- Bucket Capacity - Heaped: 2.75 yd3 / 2.1 m3
- Bucket Capacity - Struck: 2.33 yd3 / 1.78 m3
- Bucket Width: 8.37 ft / 2550 mm
Published dimensions and weight
Hyundai HL740-7
The Hyundai HL740-7 is a 11.5 t-class wheel loader with a 140 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight25350 lb11498.6 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Hyundai HL740-7 include published bucket capacity of 2.75 yd3 / 2.1 m3, published breakout force of 26190 lb / 116.5 kN, published operating weight of 25350 lb / 11498.6 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.36 ft / 2850 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.75 yd3 / 2.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.33 yd3 / 1.78 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.36 ft2850 mm
Bucket Capacity - Heaped2.75 yd32.1 m3
Bucket Capacity - Struck2.33 yd31.78 m3
Bucket Width8.37 ft2550 mm
Breakout Force26190 lb116.5 kN
Dimensions
Ground Clearance1.37 ft417 mm
Length With Bucket On Ground23.86 ft7270 mm
Width Over Tires8.37 ft2550 mm
Height To Top Of Cab10.7 ft3260 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height111 ft33830 mm
Reach At Max Lift And Dump3.19 ft970 mm
Engine
Engine Make23472347
Engine ModelQSB5.9-CQSB5.9-C
Net Power140 hp104.4 kw
Gross Power133 hp99.2 kw
Power Measured @2200 rpm2200 rpm
Max Torque434 lb ft588.5 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1500 rpm1500 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight25350 lb11498.6 kg
Fuel Capacity60.3 gal228 L
Hydraulic System Fluid Capacity43.6 gal165 L
Engine Oil Fluid Capacity4.3 gal16 L
Cooling System Fluid Capacity9.3 gal35 L
Transmission Fluid Capacity6.4 gal24 L
Front Axle/Diff Fluid Capacity5.7 gal21.2 L
Rear Axle/Diff Fluid Capacity5.7 gal21.2 L
Static Tipping Weight20240 lb9180.8 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5-25 16 PR, L320.5-25 16 PR, L3
Transmission
Transmission Type3 elements, single-stage, single phase3 elements, single-stage, single phase
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.8 mph38.2 km/h
Max Speed - Reverse15.8 mph25.3 km/h
Hydraulic System
Relief Valve Setting3130 psi21580.6 kPa
Pump Flow Capacity46.8 gal/min177 L/min
Raise Time5.5 sec5.5 sec
Dump Time1.2 sec1.2 sec
Lower Time2.8 sec2.8 sec
Pump Typeopen centered, tandem circuit systemopen centered, tandem circuit system
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.