Skip to content
List a MachineMy account / sign in
Published dimensions and weight

Case W18

The Case W18 is a wheel loader built around the Case A401BD engine (103 hp).

01Published dimensions and weight
Dimensions reference
Wheel Loader category illustration
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values40
Published highlights
  • Dump Clearance At Max Raise: 9.17 ft / 2794 mm
  • Bucket Capacity - Struck: 1.42 yd3 / 1.08 m3
  • Bucket Capacity - Heaped: 1.76 yd3 / 1.34 m3
  • Ground Clearance: 1.3 ft / 394 mm
Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case W18 include published bucket capacity of 1.76 yd3 / 1.34 m3, published engine power of 114 hp / 85.1 kw, the published “Dump Clearance At Max Raise” field of 9.17 ft / 2794 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes
  • Compare the published “Dump Clearance At Max Raise” field (9.17 ft / 2794 mm) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Bucket Capacity - Struck” field (1.42 yd3 / 1.08 m3) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Bucket Capacity - Heaped” field (1.76 yd3 / 1.34 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

01

Bucket

Dump Clearance At Max Raise9.17 ft2794 mm
Bucket Capacity - Struck1.42 yd31.08 m3
Bucket Capacity - Heaped1.76 yd31.34 m3
02

Dimensions

Ground Clearance1.3 ft394 mm
Length With Bucket On Ground19.11 ft5824.73 mm
Width Over Tires7.34 ft2235 mm
Height To Top Of Cab10.38 ft3162 mm
Wheelbase9 ft2743 mm
Hinge Pin - Max Height15 ft4572 mm
Reach At Max Lift And Dump6.99 ft2130 mm
03

Engine

Number Of Cylinders66
Engine ModelCase A401BDCase A401BD
Net Power103 hp76.9 kw
Air CleanerTwo element ,dry typeTwo element ,dry type
Gross Power114 hp85.1 kw
Torque298 lb ft404.1 Nm
Power Measured @220 rpm220 rpm
Displacement401 cu in6.6 L
Torque Measured @1450 rpm1450 rpm
Bore4.2 in105 mm
Stroke5 in127 mm
04

Operational

Fuel Capacity50 gal189.3 L
Hydraulic System Fluid Capacity29 gal109.8 L
Engine Oil Fluid Capacity3 gal11.4 L
Cooling System Fluid Capacity13 gal49.3 L
Transmission Fluid Capacity9 gal34.1 L
Front Axle/Diff Fluid Capacity4.5 gal17.1 L
Rear Axle/Diff Fluid Capacity4.5 gal17.1 L
Turning Radius32.6 ft9930 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage40 amps40 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size1400X24,G21400X24,G2
05

Transmission

Number Of Forward Gears44
Number Of Reverse Gears22
Max Speed - Forward23 mph37.1 km/h
Max Speed - Reverse9.5 mph15.3 km/h
06

Hydraulic System

Raise Time6.1 sec6.1 sec
Dump Time3.5 sec3.5 sec
Lower Time1.7 sec1.7 sec
Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

Manufacturer-published specifications.

Other Case models