- Dump Clearance At Max Raise: 10.34 ft / 3151 mm
- Breakout Force: 45096.68 lb / 200.6 kN
- Bucket Capacity - Heaped: 5.5 yd3 / 4.2 m3
- Bucket Capacity - Struck: 4.07 yd3 / 3.12 m3
Published dimensions and weight
Case 1021F
Weighing roughly 24.4 t and rated at 262 hp, the Case 1021F is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight53791 lb24399.2 kg
03Selected published values53
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 1021F include published bucket capacity of 5.5 yd3 / 4.2 m3, published breakout force of 45096.68 lb / 200.6 kN, published operating weight of 53791 lb / 24399.2 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.34 ft / 3151 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (45096.68 lb / 200.6 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.5 yd3 / 4.2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.34 ft3151 mm
Breakout Force45096.68 lb200.6 kN
Bucket Capacity - Heaped5.5 yd34.2 m3
Bucket Capacity - Struck4.07 yd33.12 m3
Bucket Width10.49 ft3195 mm
Dimensions
Ground Clearance1.67 ft509 mm
Length With Bucket On Ground29.18 ft8892 mm
Width Over Tires9.81 ft2990 mm
Height To Top Of Cab11.73 ft3573 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height13.93 ft4243 mm
Reach At Max Lift And Dump6.2 ft1887 mm
Dump Reach @ Full Height, 45° Dump: Bucket4.16 ft1.27 m
Hydraulic Cycle Times (Unloaded)
Total Cycle Time10.1 sec10.1 sec
Engine
Emissions LevelInterim Tier 4Interim Tier 4
Engine Speed - Rated Speed, Full Load2100 rpm2100 rpm
Number Of Cylinders66
Max. Torque Iso143961090.9 lb ft1479 Nm
Engine ModelFPT F2FE614CFPT F2FE614C
Net Power262 hp195.4 kw
Gross Power290 hp216.3 kw
Power Measured @1800 rpm1800 rpm
Max Torque1091 lb ft1479.2 Nm
Displacement531 cu in8.8 L
Torque Measured @1100 rpm1100 rpm
AspirationTurbochargedTurbocharged
Torque Rise49 %49 %
Alternator95 amps95 amps
Operational
Operating Weight53791 lb24399.2 kg
Fuel Capacity125 gal473.2 L
Hydraulic System Fluid Capacity66 gal249.9 L
Engine Oil Fluid Capacity8.1 gal30.3 L
Cooling System Fluid Capacity15 gal56.8 L
Transmission Fluid Capacity12 gal45.4 L
Front Axle/Diff Fluid Capacity13.5 gal51.1 L
Rear Axle/Diff Fluid Capacity13.5 gal51.1 L
Static Tipping Weight35001 lb15876.2 kg
Turning Radius20.9 ft6370 mm
Tire Size26.5R2526.5R25
Transmission
Differential LockF: Open / R: OpenF: Open / R: Open
Transmission TypePowershiftPowershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.6 mph38 km/h
Max Speed - Reverse16.1 mph26 km/h
Hydraulic System
Steering Pump TypeArticulationArticulation
Maximum System Pressure3650 psi25165.9 kPa
Pump Flow Capacity93 gal/min352.1 L/min
Raise Time6.2 sec6.2 sec
Dump Time1.3 sec1.3 sec
Lower Time2.6 sec2.6 sec
Pump TypeAxial Piston PumpAxial Piston Pump
Brakes
Service BrakeWet Multi DiscWet Multi Disc
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.