- Dump Clearance At Max Raise: 8.36 ft / 2549 mm
- Bucket Capacity - Heaped: 1.18 yd3 / 0.91 m3
- Bucket Capacity - Struck: 0.85 yd3 / 0.65 m3
- Bucket Width: 6.73 ft / 2050 mm
Published dimensions and weight
Case 121E
The Case 121E pairs the F4M2011, tier 2 certified engine (57 hp) with an operating weight near 4.9 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10849 lb4921 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 121E include published bucket capacity of 1.18 yd3 / 0.91 m3, published breakout force of 9337 lb / 41.53 kN, published operating weight of 10849 lb / 4921 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.36 ft / 2549 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.18 yd3 / 0.91 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.85 yd3 / 0.65 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.36 ft2549 mm
Bucket Capacity - Heaped1.18 yd30.91 m3
Bucket Capacity - Struck0.85 yd30.65 m3
Bucket Width6.73 ft2050 mm
Breakout Force9337 lb41.53 kN
Dimensions
Ground Clearance1.08 ft330 mm
Length With Bucket On Ground18 ft5485 mm
Width Over Tires6.27 ft1909 mm
Height To Top Of Cab9.27 ft2824 mm
Wheelbase7.38 ft2250 mm
Hinge Pin - Max Height10.83 ft3302 mm
Reach At Max Lift And Dump2.71 ft823 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelF4M2011, tier 2 certifiedF4M2011, tier 2 certified
Net Power57 hp42 kw
Gross Power59 hp44 kw
Power Measured @2400 rpm2400 rpm
Max Torque131 lb ft178 Nm
Displacement190 cu in3.2 L
Torque Measured @1700 rpm1700 rpm
Torque Rise6 %6 %
Operational
Operating Weight10849 lb4921 kg
Fuel Capacity26.4 gal100 L
Hydraulic System Fluid Capacity17.7 gal67 L
Engine Oil Fluid Capacity2.6 gal10 L
Front Axle/Diff Fluid Capacity2.4 gal9.3 L
Rear Axle/Diff Fluid Capacity2.4 gal9.3 L
Static Tipping Weight7673 lb3480 kg
Turning Radius13 ft3963 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size14.5x2014.5x20
Transmission
Transmission Typehydrostatic transmissionhydrostatic transmission
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3916 psi27000 kPa
Pump Flow Capacity17.7 gal/min67 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump Typeopen centered pressure/flow compensatedopen centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.