- Dump Clearance At Max Raise: 4.43 ft / 1350 mm
- Bucket Capacity - Heaped: 0.75 yd3 / 0.57 m3
- Bucket Capacity - Struck: 0.67 yd3 / 0.51 m3
- Breakout Force: 110076797.99 lb / 489646.04 kN
Published dimensions and weight
Case W11B
The Case W11B is a wheel loader powered by a 66 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values43
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case W11B include published bucket capacity of 0.75 yd3 / 0.57 m3, published breakout force of 110076797.99 lb / 489646.04 kN, published engine power of 71 hp / 53 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (4.43 ft / 1350 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.75 yd3 / 0.57 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.67 yd3 / 0.51 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise4.43 ft1350 mm
Bucket Capacity - Heaped0.75 yd30.57 m3
Bucket Capacity - Struck0.67 yd30.51 m3
Breakout Force110076797.99 lb489646.04 kN
Dimensions
Ground Clearance0.84 ft254 mm
Length With Bucket On Ground17.16 ft5230 mm
Width Over Tires5.88 ft1790 mm
Height To Top Of Cab7.91 ft2410 mm
Wheelbase7.68 ft2340 mm
Hinge Pin - Max Height10.34 ft3150 mm
Reach At Max Lift And Dump3.35 ft1020 mm
Engine
Number Of Cylinders44
Engine MakeCaseCase
Engine Model4-3904-390
Net Power66 hp49.3 kw
Gross Power71 hp53 kw
Power Measured @2100 rpm2100 rpm
Displacement239.3 cu in4 L
Net Torque178 lb ft241.3 Nm
Torque Measured @1200 rpm1200 rpm
Bore4.1 in102 mm
Stroke4.8 in120 mm
Operational
Fuel Capacity28.1 gal106 L
Hydraulic System Fluid Capacity14.1 gal53 L
Engine Oil Fluid Capacity3 gal11 L
Cooling System Fluid Capacity5.1 gal19 L
Transmission Fluid Capacity3.6 gal13.3 L
Turning Radius27.4 ft8330 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage42 amps42 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size15.00 X19.515.00 X19.5
Transmission
Transmission TypePower shiftPower shift
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward22.3 mph35.9 km/h
Max Speed - Reverse22.3 mph35.9 km/h
Hydraulic System
Pump Flow Capacity26 gal/min98.4 L/min
Raise Time5.2 sec5.2 sec
Dump Time1.9 sec1.9 sec
Lower Time5.3 sec5.3 sec
Total Cycle12.4 sec12.4 sec
Pump TypeDual tandemDual tandem
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.