- Dump Clearance At Max Raise: 8.67 ft / 2640 mm
- Bucket Capacity - Heaped: 0.75 yd3 / 0.58 m3
- Bucket Capacity - Struck: 0.61 yd3 / 0.47 m3
- Ground Clearance: 0.84 ft / 254 mm
Published dimensions and weight
Case W11
The Case W11 is a wheel loader powered by a 55 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale

01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values36
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case W11 include published bucket capacity of 0.75 yd3 / 0.58 m3, published engine power of 60 hp / 44.7 kw, the published “Dump Clearance At Max Raise” field of 8.67 ft / 2640 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.67 ft / 2640 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.75 yd3 / 0.58 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.61 yd3 / 0.47 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.67 ft2640 mm
Bucket Capacity - Heaped0.75 yd30.58 m3
Bucket Capacity - Struck0.61 yd30.47 m3
Dimensions
Ground Clearance0.84 ft254 mm
Width Over Tires5.68 ft1730 mm
Height To Top Of Cab7.85 ft2390 mm
Wheelbase7.68 ft2340 mm
Hinge Pin - Max Height10.34 ft3150 mm
Overall Height13 ft3960 mm
Overall Length16.77 ft5110 mm
Engine
Number Of Cylinders44
Engine MakeCaseCase
Engine ModelG207DG207D
Net Power55 hp41 kw
Gross Power60 hp44.7 kw
Power Measured @2100 rpm2100 rpm
Displacement207.5 cu in3.4 L
Torque Measured @1300 rpm1300 rpm
Bore4.1 in102 mm
Stroke4.2 in105 mm
Operational
Fuel Capacity28.1 gal106 L
Hydraulic System Fluid Capacity14.1 gal53 L
Engine Oil Fluid Capacity1.8 gal6.7 L
Cooling System Fluid Capacity4 gal15.2 L
Transmission Fluid Capacity3.6 gal13.3 L
Operating Voltage12 V12 V
Alternator Supplied Amperage42 amps42 amps
Rear Axle Oscillation24 degrees24 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward22.7 mph36.6 km/h
Max Speed - Reverse22.7 mph36.6 km/h
Hydraulic System
Raise Time5.2 sec5.2 sec
Dump Time1.9 sec1.9 sec
Lower Time5.3 sec5.3 sec
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.