- Dump Clearance At Max Raise: 10.99 ft / 3347 mm
- Bucket Capacity - Struck: 4.08 yd3 / 3.12 m3
- Bucket Width: 9.95 ft / 3030 mm
- Bucket Capacity - Heaped: 4.75 yd3 / 3.64 m3
Published dimensions and weight
Case 921FXR
The Case 921FXR is a wheel loader of about 20 t, built around the F4HFE6131 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight44090 lb19998.9 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 921FXR include published bucket capacity of 4.75 yd3 / 3.64 m3, published operating weight of 44090 lb / 19998.9 kg, published engine power of 255 hp / 190.2 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.99 ft / 3347 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.08 yd3 / 3.12 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (9.95 ft / 3030 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.99 ft3347 mm
Bucket Capacity - Struck4.08 yd33.12 m3
Bucket Width9.95 ft3030 mm
Bucket Capacity - Heaped4.75 yd33.64 m3
Dimensions
Ground Clearance1.37 ft415 mm
Length With Bucket On Ground27.76 ft8461 mm
Width Over Tires9.49 ft2890 mm
Height To Top Of Cab11.32 ft3450 mm
Wheelbase10.96 ft3340 mm
Hinge Pin - Max Height14.96 ft4559 mm
Reach At Max Lift And Dump4.29 ft1307 mm
Engine
Number Of Cylinders66
Engine Make25622562
Engine ModelF4HFE6131F4HFE6131
Net Power225 hp167.8 kw
Gross Power255 hp190.2 kw
Power Measured @1600 rpm1600 rpm
Max Torque959 lb ft1300.3 Nm
Displacement411 cu in6.8 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbochargedTurbocharged
Torque Rise49 %49 %
Operational
Operating Weight44090 lb19998.9 kg
Fuel Capacity76 gal287.7 L
Hydraulic System Fluid Capacity53 gal200.7 L
Engine Oil Fluid Capacity4 gal15.1 L
Cooling System Fluid Capacity8 gal30 L
Transmission Fluid Capacity9.1 gal34.1 L
Static Tipping Weight29229 lb13258.1 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5 25 L323.5 25 L3
Transmission
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.4 mph36.1 km/h
Max Speed - Reverse15 mph24.2 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity76.7 gal/min290 L/min
Raise Time6.2 sec6.2 sec
Dump Time1.4 sec1.4 sec
Lower Time3.1 sec3.1 sec
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.