- Dump Clearance At Max Raise: 10.09 ft / 3080 mm
- Bucket Capacity - Heaped: 5.78 yd3 / 4.42 m3
- Bucket Capacity - Struck: 4.88 yd3 / 3.74 m3
- Bucket Width: 10.4 ft / 3170 mm
Published dimensions and weight
Case 921E
The Case 921E is a wheel loader of about 23 t, powered by a 297 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight50622 lb22962 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 921E include published bucket capacity of 5.78 yd3 / 4.42 m3, published breakout force of 44476 lb / 197.84 kN, published operating weight of 50622 lb / 22962 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.09 ft / 3080 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (5.78 yd3 / 4.42 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.88 yd3 / 3.74 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.09 ft3080 mm
Bucket Capacity - Heaped5.78 yd34.42 m3
Bucket Capacity - Struck4.88 yd33.74 m3
Bucket Width10.4 ft3170 mm
Breakout Force44476 lb197.84 kN
Dimensions
Ground Clearance1.6 ft487.68 mm
Length With Bucket On Ground28.88 ft8800 mm
Width Over Tires9.81 ft2987 mm
Height To Top Of Cab12.12 ft3700 mm
Wheelbase11.17 ft3400 mm
Hinge Pin - Max Height14.03 ft4280 mm
Reach At Max Lift And Dump4.17 ft1270 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSM 11, Tier III CertifiedQSM 11, Tier III Certified
Net Power297 hp221 kw
Gross Power274 hp204 kw
Power Measured @1800 rpm1800 rpm
Max Torque1013 lb ft1373 Nm
Displacement660 cu in10.8 L
Torque Measured @900 rpm900 rpm
AspirationTurbocharged with AftercoolerTurbocharged with Aftercooler
Operational
Operating Weight50622 lb22962 kg
Fuel Capacity104 gal393.7 L
Hydraulic System Fluid Capacity64 gal242 L
Engine Oil Fluid Capacity9.8 gal36.9 L
Cooling System Fluid Capacity15 gal56.8 L
Transmission Fluid Capacity10.5 gal39.7 L
Front Axle/Diff Fluid Capacity12.5 gal47.3 L
Rear Axle/Diff Fluid Capacity12.5 gal47.3 L
Static Tipping Weight42592 lb19319 kg
Turning Radius22.6 ft6870 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage95 amps95 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size26.5 x 25 L3 Bias26.5 x 25 L3 Bias
Transmission
Transmission Type4F/3R Proportional w/Electronic Control Module4F/3R Proportional w/Electronic Control Module
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.2 mph37.4 km/h
Max Speed - Reverse16.1 mph25.8 km/h
Hydraulic System
Relief Valve Setting3600 psi24821 kPa
Pump Flow Capacity42.8 gal/min162.1 L/min
Raise Time6.2 sec6.2 sec
Dump Time3.6 sec3.6 sec
Lower Time3 sec3 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.