- Dump Clearance At Max Raise: 10.34 ft / 3150 mm
- Bucket Capacity - Heaped: 4.75 yd3 / 3.63 m3
- Bucket Capacity - Struck: 3.81 yd3 / 2.91 m3
- Bucket Width: 10.01 ft / 3050 mm
Published dimensions and weight
Case 921C
The Case 921C is a 23 t-class wheel loader with a 248 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight50621 lb22961.3 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 921C include published bucket capacity of 4.75 yd3 / 3.63 m3, published breakout force of 50275 lb, published operating weight of 50621 lb / 22961.3 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.34 ft / 3150 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.75 yd3 / 3.63 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.81 yd3 / 2.91 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.34 ft3150 mm
Bucket Capacity - Heaped4.75 yd33.63 m3
Bucket Capacity - Struck3.81 yd32.91 m3
Bucket Width10.01 ft3050 mm
Breakout Force50275 lb50275 -
Dimensions
Ground Clearance1.46 ft445 mm
Length With Bucket On Ground28.06 ft8550 mm
Width Over Tires9.65 ft2940 mm
Height To Top Of Cab11.72 ft3570 mm
Wheelbase11.16 ft3400 mm
Hinge Pin - Max Height14.05 ft4280 mm
Reach At Max Lift And Dump3.61 ft1100 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSMIIQSMII
Net Power248 hp185 kw
Gross Power270 hp201.4 kw
Power Measured @2100 rpm2100 rpm
Max Torque926 lb ft1255.5 Nm
Displacement661 cu in10.9 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged and air to air cooledturbocharged and air to air cooled
Torque Rise41 %41 %
Operational
Operating Weight50621 lb22961.3 kg
Fuel Capacity104.1 gal393.7 L
Hydraulic System Fluid Capacity61.5 gal232.8 L
Engine Oil Fluid Capacity9.8 gal36.9 L
Cooling System Fluid Capacity12.5 gal47.3 L
Transmission Fluid Capacity7.6 gal28.4 L
Front Axle/Diff Fluid Capacity16.9 gal63.6 L
Rear Axle/Diff Fluid Capacity16.9 gal63.6 L
Static Tipping Weight43305.5 lb19643 kg
Turning Radius20.2 ft6140 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size26.5x25 L326.5x25 L3
Transmission
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.1 mph38.8 km/h
Max Speed - Reverse16.6 mph26.8 km/h
Hydraulic System
Relief Valve Setting2850 psi19650.1 kPa
Pump Flow Capacity38 gal/min143.9 L/min
Raise Time6.2 sec6.2 sec
Dump Time1.5 sec1.5 sec
Lower Time4.9 sec4.9 sec
Pump Typedual, vane-type tandemdual, vane-type tandem
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.