- Dump Clearance At Max Raise: 9.72 ft / 2960 mm
- Bucket Capacity - Heaped: 4.43 yd3 / 3.39 m3
- Bucket Capacity - Struck: 3.78 yd3 / 2.89 m3
- Bucket Width: 9.6 ft / 2930 mm
Published dimensions and weight
Case 821E
The Case 821E is a wheel loader of about 17.2 t, built around the Family IV, 667TA/EBD Tier III Certified engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight37844 lb17166 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 821E include published bucket capacity of 4.43 yd3 / 3.39 m3, published breakout force of 34416 lb / 153.09 kN, published operating weight of 37844 lb / 17166 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.72 ft / 2960 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.43 yd3 / 3.39 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.78 yd3 / 2.89 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.72 ft2960 mm
Bucket Capacity - Heaped4.43 yd33.39 m3
Bucket Capacity - Struck3.78 yd32.89 m3
Bucket Width9.6 ft2930 mm
Breakout Force34416 lb153.09 kN
Dimensions
Ground Clearance1.37 ft415.8 mm
Length With Bucket On Ground25.9 ft7890 mm
Width Over Tires9.47 ft2890 mm
Height To Top Of Cab11.4 ft3450 mm
Wheelbase10.98 ft3340 mm
Hinge Pin - Max Height13.51 ft4120 mm
Reach At Max Lift And Dump3.71 ft1130 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFamily IV, 667TA/EBD Tier III CertifiedFamily IV, 667TA/EBD Tier III Certified
Net Power198 hp148 kw
Gross Power210 hp157 kw
Power Measured @1800 rpm1800 rpm
Max Torque724 lb ft981.7 Nm
Displacement411 cu in6.7 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbocharged and AftercooledTurbocharged and Aftercooled
Operational
Operating Weight37844 lb17166 kg
Fuel Capacity76 gal288 L
Hydraulic System Fluid Capacity46 gal174 L
Engine Oil Fluid Capacity5.6 gal21 L
Cooling System Fluid Capacity110.8 gal40.9 L
Transmission Fluid Capacity10.5 gal39.7 L
Front Axle/Diff Fluid Capacity9.9 gal37.4 L
Rear Axle/Diff Fluid Capacity6.3 gal23.7 L
Static Tipping Weight31376 lb14232 kg
Turning Radius19.8 ft6030 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5 x 25 l2 bias23.5 x 25 l2 bias
Transmission
Transmission Type4F/3R Proportional w/Electronic Control Module4F/3R Proportional w/Electronic Control Module
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23 mph37 km/h
Max Speed - Reverse15.7 mph25.3 km/h
Hydraulic System
Relief Valve Setting3600 psi24821 kPa
Pump Flow Capacity31.6 gal/min119.6 L/min
Raise Time5.6 sec5.6 sec
Dump Time1.2 sec1.2 sec
Lower Time2.8 sec2.8 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.