- Dump Clearance At Max Raise: 9.75 ft / 2970 mm
- Bucket Capacity - Heaped: 3.51 yd3 / 2.68 m3
- Bucket Capacity - Struck: 3.04 yd3 / 2.32 m3
- Bucket Width: 9.09 ft / 2770 mm
Published dimensions and weight
Case 821C
The Case 821C is a wheel loader of about 17.2 t, built around the 6TAA-8304 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight37901 lb17191.7 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 821C include published bucket capacity of 3.51 yd3 / 2.68 m3, published breakout force of 36391 lb, published operating weight of 37901 lb / 17191.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.75 ft / 2970 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.51 yd3 / 2.68 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.04 yd3 / 2.32 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.75 ft2970 mm
Bucket Capacity - Heaped3.51 yd32.68 m3
Bucket Capacity - Struck3.04 yd32.32 m3
Bucket Width9.09 ft2770 mm
Breakout Force36391 lb36391 -
Dimensions
Ground Clearance1.32 ft401 mm
Length With Bucket On Ground24.51 ft7470 mm
Width Over Tires8.86 ft2700 mm
Height To Top Of Cab10.93 ft3330 mm
Wheelbase10.5 ft3200 mm
Hinge Pin - Max Height12.96 ft3950 mm
Reach At Max Lift And Dump3.65 ft1110 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine Model6TAA-83046TAA-8304
Net Power186 hp138.8 kw
Gross Power204 hp152.2 kw
Power Measured @2000 rpm2000 rpm
Max Torque671 lb ft909.8 Nm
Displacement504 cu in8.3 L
Torque Measured @1400 rpm1400 rpm
Aspirationturbocharged and air to air cooledturbocharged and air to air cooled
Torque Rise51 %51 %
Operational
Operating Weight37901 lb17191.7 kg
Fuel Capacity70.8 gal268 L
Hydraulic System Fluid Capacity46 gal174 L
Engine Oil Fluid Capacity5.6 gal21 L
Cooling System Fluid Capacity8.5 gal32 L
Transmission Fluid Capacity3.2 gal12 L
Front Axle/Diff Fluid Capacity8.8 gal33 L
Rear Axle/Diff Fluid Capacity7.1 gal26.5 L
Static Tipping Weight30082.1 lb13645 kg
Turning Radius18.9 ft5750 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5-25 L323.5-25 L3
Transmission
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.5 mph37.9 km/h
Max Speed - Reverse16.6 mph26.8 km/h
Hydraulic System
Relief Valve Setting2813.8 psi19400 kPa
Pump Flow Capacity50 gal/min189 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.6 sec1.6 sec
Lower Time4.3 sec4.3 sec
Pump Typedual, vane-type tandemdual, vane-type tandem
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.