- Dump Clearance At Max Raise: 9.59 ft / 2921 mm
- Bucket Width: 8.86 ft / 2700 mm
- Bucket Capacity - Heaped: 3 yd3 / 2.3 m3
- Ground Clearance: 1.2 ft / 365 mm
Published dimensions and weight
Case 721FXT
The Case 721FXT is a wheel loader of about 14.7 t, built around the F4HFE613Y engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight32339 lb14668.8 kg
03Selected published values42
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721FXT include published bucket capacity of 3 yd3 / 2.3 m3, published operating weight of 32339 lb / 14668.8 kg, published engine power of 195 hp / 145.5 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.59 ft / 2921 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (8.86 ft / 2700 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.59 ft2921 mm
Bucket Width8.86 ft2700 mm
Bucket Capacity - Heaped3 yd32.3 m3
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground26.03 ft7931 mm
Width Over Tires8.71 ft2653 mm
Height To Top Of Cab11.11 ft3385 mm
Wheelbase10.68 ft3253 mm
Hinge Pin - Max Height13.65 ft4160 mm
Reach At Max Lift And Dump4.2 ft1279 mm
Engine
Number Of Cylinders66
Engine Make25622562
Engine ModelF4HFE613YF4HFE613Y
Net Power179 hp133.5 kw
Gross Power195 hp145.5 kw
Power Measured @2000 rpm2000 rpm
Max Torque674 lb ft913.9 Nm
Displacement411 cu in6.8 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbochargedTurbocharged
Torque Rise37 %37 %
Operational
Operating Weight32339 lb14668.8 kg
Fuel Capacity65 gal246.1 L
Hydraulic System Fluid Capacity47 gal178 L
Engine Oil Fluid Capacity4 gal15.1 L
Cooling System Fluid Capacity7.6 gal28.4 L
Transmission Fluid Capacity9 gal34 L
Front Axle/Diff Fluid Capacity9.3 gal35 L
Rear Axle/Diff Fluid Capacity6.1 gal23 L
Static Tipping Weight22683 lb10288.9 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Transmission
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.5 mph37.9 km/h
Max Speed - Reverse15.9 mph25.6 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity54.5 gal/min206 L/min
Raise Time5.2 sec5.2 sec
Dump Time1.2 sec1.2 sec
Lower Time2.4 sec2.4 sec
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.