- Dump Clearance At Max Raise: 9.62 ft / 2930 mm
- Breakout Force: 31360.85 lb / 139.5 kN
- Bucket Capacity - Heaped: 3.26 yd3 / 2.5 m3
- Bucket Capacity - Struck: 2.76 yd3 / 2.12 m3
Published dimensions and weight
Case 721F
The Case 721F is a wheel loader of about 14.3 t, built around the FPT F4HFE613T engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight31508 lb14291.8 kg
03Selected published values56
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721F include published bucket capacity of 3.26 yd3 / 2.5 m3, published breakout force of 31360.85 lb / 139.5 kN, published operating weight of 31508 lb / 14291.8 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.62 ft / 2930 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (31360.85 lb / 139.5 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.26 yd3 / 2.5 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.62 ft2930 mm
Breakout Force31360.85 lb139.5 kN
Bucket Capacity - Heaped3.26 yd32.5 m3
Bucket Capacity - Struck2.76 yd32.12 m3
Bucket Width8.86 ft2700 mm
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground25.1 ft7648 mm
Width Over Tires8.71 ft2653 mm
Height To Top Of Cab11.11 ft3385 mm
Wheelbase10.68 ft3253 mm
Hinge Pin - Max Height13.06 ft3979 mm
Reach At Max Lift And Dump5.44 ft1658 mm
Dump Reach @ Full Height, 45° Dump: Bucket3.7 ft1.13 m
Hydraulic Cycle Times (Unloaded)
Total Cycle Time8.9 sec8.9 sec
Engine
Emissions LevelTier 4Tier 4
Engine Speed - Rated Speed, Full Load2000 rpm2000 rpm
Number Of Cylinders66
Max. Torque Iso14396700.7 lb ft950 Nm
Engine ModelFPT F4HFE613TFPT F4HFE613T
Net Power178.4 hp133 kw
Gross Power194.5 hp145 kw
Power Measured @2000 rpm2000 rpm
Max Torque674 lb ft913.9 Nm
Displacement411 cu in6.8 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbochargedTurbocharged
Torque Rise37 %37 %
Alternator120 amps120 amps
Operational
Operating Weight31508 lb14291.8 kg
Fuel Capacity65 gal246.1 L
Hydraulic System Fluid Capacity47 gal178 L
Engine Oil Fluid Capacity4 gal15.1 L
Cooling System Fluid Capacity7.6 gal28.4 L
Transmission Fluid Capacity9 gal34 L
Front Axle/Diff Fluid Capacity9.3 gal35 L
Rear Axle/Diff Fluid Capacity6.1 gal23 L
Static Tipping Weight23371.3 lb10601 kg
Turning Radius18.9 ft5750 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Transmission
Differential LockF: LSD / R: LSDF: LSD / R: LSD
Transmission TypePowershiftPowershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.5 mph37.9 km/h
Max Speed - Reverse15.9 mph25.6 km/h
Hydraulic System
Steering Pump TypeArticulationArticulation
Maximum System Pressure3625 psi24993.5 kPa
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity31.8 gal/min120 L/min
Raise Time5.2 sec5.2 sec
Dump Time1.2 sec1.2 sec
Lower Time2.4 sec2.4 sec
Pump TypeAxial Piston PumpAxial Piston Pump
Brakes
Service BrakeWet Multi DiscWet Multi Disc
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.