- Dump Clearance At Max Raise: 9.48 ft / 2889 mm
- Bucket Capacity - Heaped: 3.5 yd3 / 2.68 m3
- Bucket Capacity - Struck: 3 yd3 / 2.3 m3
- Bucket Width: 8.83 ft / 2700 mm
Published dimensions and weight
Case 721E
The Case 721E pairs the Family IV 667TA/EED, Tier III Certified engine (172 hp) with an operating weight near 13.9 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight30644 lb13900 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721E include published bucket capacity of 3.5 yd3 / 2.68 m3, published breakout force of 29805 lb, published operating weight of 30644 lb / 13900 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.48 ft / 2889 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.5 yd3 / 2.68 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.48 ft2889 mm
Bucket Capacity - Heaped3.5 yd32.68 m3
Bucket Capacity - Struck3 yd32.3 m3
Bucket Width8.83 ft2700 mm
Breakout Force29805 lb_ -
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground25.29 ft7710 mm
Width Over Tires8.4 ft2562 mm
Height To Top Of Cab11.17 ft3404 mm
Wheelbase10.67 ft3253 mm
Hinge Pin - Max Height13.05 ft3979 mm
Reach At Max Lift And Dump3.85 ft1172 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFamily IV 667TA/EED, Tier III CertifiedFamily IV 667TA/EED, Tier III Certified
Net Power172 hp128 kw
Gross Power182 hp136 kw
Power Measured @1800 rpm1800 rpm
Max Torque596 lb ft809 Nm
Displacement411 cu in6.7 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbocharged with AftercoolerTurbocharged with Aftercooler
Torque Rise31.4 %31.4 %
Operational
Operating Weight30644 lb13900 kg
Fuel Capacity65 gal246 L
Hydraulic System Fluid Capacity51 gal193.1 L
Engine Oil Fluid Capacity3.8 gal14.2 L
Cooling System Fluid Capacity9.8 gal36.9 L
Transmission Fluid Capacity6.8 gal25.6 L
Front Axle/Diff Fluid Capacity8 gal30.3 L
Rear Axle/Diff Fluid Capacity7.3 gal27.4 L
Static Tipping Weight27616 lb12526 kg
Turning Radius18.9 ft5750 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R2520.5 R25
Transmission
Transmission Type4F/3R Proportional w/Electronic Control Module torque sensing autoshift/manual shift and modulation4F/3R Proportional w/Electronic Control Module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.6 mph38 km/h
Max Speed - Reverse16 mph25.7 km/h
Hydraulic System
Relief Valve Setting3600 psi24821 kPa
Pump Flow Capacity31.6 gal/min119.6 L/min
Raise Time5.6 sec5.59 sec
Dump Time1.8 sec1.8 sec
Lower Time3.3 sec3.29 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.