- Dump Clearance At Max Raise: 9.62 ft / 2930 mm
- Bucket Capacity - Heaped: 3 yd3 / 2.3 m3
- Bucket Width: 8.86 ft / 2700 mm
- Breakout Force: 28046 lb / 124.76 kN
Published dimensions and weight
Case 721DXT
The Case 721DXT is a wheel loader of about 14.3 t; its Family III 668TA/E2 engine is rated at 170 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight31574 lb14321.8 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721DXT include published bucket capacity of 3 yd3 / 2.3 m3, published breakout force of 28046 lb / 124.76 kN, published operating weight of 31574 lb / 14321.8 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.62 ft / 2930 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (8.86 ft / 2700 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.62 ft2930 mm
Bucket Capacity - Heaped3 yd32.3 m3
Bucket Width8.86 ft2700 mm
Breakout Force28046 lb124.76 kN
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground25.99 ft7919 mm
Width Over Tires8.54 ft2603 mm
Height To Top Of Cab10.95 ft3337 mm
Wheelbase10.68 ft3253 mm
Hinge Pin - Max Height13.64 ft4157 mm
Reach At Max Lift And Dump4.2 ft1279 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFamily III 668TA/E2Family III 668TA/E2
Net Power170 hp126.8 kw
Gross Power181 hp135 kw
Power Measured @2000 rpm2000 rpm
Max Torque566 lb ft767.4 Nm
Displacement411 cu in6.8 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged and air to air cooledturbocharged and air to air cooled
Torque Rise24.8 %24.8 %
Operational
Operating Weight31574 lb14321.8 kg
Fuel Capacity65 gal246 L
Hydraulic System Fluid Capacity51.1 gal193.1 L
Engine Oil Fluid Capacity3.8 gal14.2 L
Cooling System Fluid Capacity9.8 gal36.9 L
Transmission Fluid Capacity6.8 gal25.6 L
Front Axle/Diff Fluid Capacity8.1 gal30.3 L
Rear Axle/Diff Fluid Capacity7.3 gal27.4 L
Static Tipping Weight27615.2 lb12526 kg
Turning Radius19 ft5770 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5x25 L320.5x25 L3
Transmission
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.6 mph38 km/h
Max Speed - Reverse16 mph25.8 km/h
Hydraulic System
Relief Valve Setting3626 psi25000 kPa
Pump Flow Capacity206 gal/min779.8 L/min
Raise Time5.6 sec5.59 sec
Dump Time1.9 sec1.9 sec
Lower Time3.3 sec3.29 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.