- Dump Clearance At Max Raise: 9.48 ft / 2889 mm
- Bucket Capacity - Heaped: 3.51 yd3 / 2.68 m3
- Bucket Capacity - Struck: 3.01 yd3 / 2.3 m3
- Bucket Width: 8.86 ft / 2700 mm
Published dimensions and weight
Case 721D
The Case 721D is a wheel loader of about 13.9 t; its Family III 668TA/E2 engine is rated at 170 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight30644 lb13899.9 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721D include published bucket capacity of 3.51 yd3 / 2.68 m3, published breakout force of 29806 lb, published operating weight of 30644 lb / 13899.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.48 ft / 2889 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.51 yd3 / 2.68 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.01 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.48 ft2889 mm
Bucket Capacity - Heaped3.51 yd32.68 m3
Bucket Capacity - Struck3.01 yd32.3 m3
Bucket Width8.86 ft2700 mm
Breakout Force29806 lb29806 -
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground25.29 ft7708 mm
Width Over Tires8.54 ft2603 mm
Height To Top Of Cab10.95 ft3337 mm
Wheelbase10.68 ft3253 mm
Hinge Pin - Max Height13.06 ft3979 mm
Reach At Max Lift And Dump3.85 ft1172 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFamily III 668TA/E2Family III 668TA/E2
Net Power170 hp126.8 kw
Gross Power181 hp135 kw
Power Measured @2000 rpm2000 rpm
Max Torque566 lb ft767.4 Nm
Displacement411 cu in6.8 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged and air to air cooledturbocharged and air to air cooled
Torque Rise24.8 %24.8 %
Operational
Operating Weight30644 lb13899.9 kg
Fuel Capacity65 gal246 L
Hydraulic System Fluid Capacity51.1 gal193.1 L
Engine Oil Fluid Capacity3.8 gal14.2 L
Cooling System Fluid Capacity9.8 gal36.9 L
Transmission Fluid Capacity6.8 gal25.6 L
Front Axle/Diff Fluid Capacity8.1 gal30.3 L
Rear Axle/Diff Fluid Capacity7.3 gal27.4 L
Static Tipping Weight27615.2 lb12526 kg
Turning Radius19 ft5770 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5x25 L320.5x25 L3
Transmission
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.6 mph38 km/h
Max Speed - Reverse16 mph25.8 km/h
Hydraulic System
Relief Valve Setting3626 psi25000 kPa
Pump Flow Capacity54.5 gal/min206 L/min
Raise Time5.6 sec5.59 sec
Dump Time2.4 sec2.4 sec
Lower Time3.3 sec3.29 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.