- Dump Clearance At Max Raise: 9.88 ft / 3010 mm
- Bucket Capacity - Heaped: 2.5 yd3 / 1.91 m3
- Bucket Capacity - Struck: 2.15 yd3 / 1.64 m3
- Bucket Width: 8.6 ft / 2620 mm
Published dimensions and weight
Case 721C
The Case 721C is a 13.4 t-class wheel loader with a 152 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight29630 lb13440 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 721C include published bucket capacity of 2.5 yd3 / 1.91 m3, published breakout force of 35005 lb, published operating weight of 29630 lb / 13440 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.88 ft / 3010 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.5 yd3 / 1.91 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.15 yd3 / 1.64 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.88 ft3010 mm
Bucket Capacity - Heaped2.5 yd31.91 m3
Bucket Capacity - Struck2.15 yd31.64 m3
Bucket Width8.6 ft2620 mm
Breakout Force35005 lb35005 -
Dimensions
Ground Clearance1.38 ft419 mm
Length With Bucket On Ground22.61 ft6890 mm
Width Over Tires8.31 ft2530 mm
Height To Top Of Cab10.7 ft3260 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height12.5 ft3810 mm
Reach At Max Lift And Dump3.13 ft953 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine Model6T-8306T-830
Net Power152 hp113.4 kw
Gross Power165 hp123.1 kw
Power Measured @2200 rpm2200 rpm
Max Torque545 lb ft739 Nm
Displacement504 cu in8.3 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbochargedturbocharged
Torque Rise41 %41 %
Operational
Operating Weight29630 lb13440 kg
Fuel Capacity53.9 gal204 L
Hydraulic System Fluid Capacity40.5 gal153.3 L
Engine Oil Fluid Capacity5.5 gal20.8 L
Cooling System Fluid Capacity8.6 gal32.2 L
Transmission Fluid Capacity3.3 gal12.3 L
Front Axle/Diff Fluid Capacity7.4 gal28 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight23221.3 lb10533 kg
Turning Radius17.3 ft5250 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5-25 L320.5-25 L3
Transmission
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.2 mph39 km/h
Max Speed - Reverse17.1 mph27.6 km/h
Hydraulic System
Relief Valve Setting2775 psi132.9 kPa
Pump Flow Capacity18.6 gal/min70.5 L/min
Raise Time5.4 sec5.4 sec
Dump Time1.8 sec1.8 sec
Lower Time5.1 sec5.1 sec
Pump Typedual, vane-type tandemdual, vane-type tandem
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.