- Dump Clearance At Max Raise: 9.19 ft / 2801 mm
- Bucket Capacity - Heaped: 3 yd3 / 2.3 m3
- Bucket Capacity - Struck: 2.56 yd3 / 1.96 m3
- Bucket Width: 8.53 ft / 2602 mm
Published dimensions and weight
Case 621E
Weighing roughly 12.4 t and rated at 146 hp, the Case 621E is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27406 lb12431 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 621E include published bucket capacity of 3 yd3 / 2.3 m3, published breakout force of 23249 lb / 103.42 kN, published operating weight of 27406 lb / 12431 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.19 ft / 2801 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.56 yd3 / 1.96 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.19 ft2801 mm
Bucket Capacity - Heaped3 yd32.3 m3
Bucket Capacity - Struck2.56 yd31.96 m3
Bucket Width8.53 ft2602 mm
Breakout Force23249 lb103.42 kN
Dimensions
Ground Clearance1.22 ft370 mm
Length With Bucket On Ground24.23 ft7384 mm
Width Over Tires8.27 ft2523 mm
Height To Top Of Cab11.15 ft3395 mm
Wheelbase9.51 ft2900 mm
Hinge Pin - Max Height12.57 ft3830 mm
Reach At Max Lift And Dump3.33 ft1013 mm
Engine
Number Of Cylinders66
Engine Make22392239
Engine ModelFamily IV, 667TA/EDB, Tier III certifiedFamily IV, 667TA/EDB, Tier III certified
Net Power146 hp109 kw
Gross Power156 hp116 kw
Power Measured @1800 rpm1800 rpm
Max Torque508 lb ft689 Nm
Displacement409 cu in6.7 L
Torque Measured @1300 rpm1300 rpm
AspirationTurbocharged and AftercooledTurbocharged and Aftercooled
Torque Rise33 %33 %
Operational
Operating Weight27406 lb12431 kg
Fuel Capacity65 gal246 L
Hydraulic System Fluid Capacity39 gal147.6 L
Engine Oil Fluid Capacity3.5 gal13.2 L
Cooling System Fluid Capacity9.5 gal36 L
Transmission Fluid Capacity5 gal18.9 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight23376 lb10603 kg
Turning Radius16.9 ft5245 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage65 amps65 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R2520.5 R25
Transmission
Transmission Type4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.6 km/h
Max Speed - Reverse15.6 mph25 km/h
Hydraulic System
Relief Valve Setting3600 psi24822 kPa
Pump Flow Capacity45.2 gal/min171 L/min
Raise Time6.3 sec6.3 sec
Dump Time1.3 sec1.3 sec
Lower Time4.7 sec4.7 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.