- Breakout Force: 27808.87 lb / 123.7 kN
- Bucket Capacity - Heaped: 2.36 yd3 / 1.8 m3
- Bucket Capacity - Struck: 1.97 yd3 / 1.5 m3
- Hinge Pin - Max Height: 12.7 ft / 3870 mm
Published dimensions and weight
Case 621C XT
The Case 621C XT pairs the 6T-590 engine (130.1 hp) with an operating weight near 13.1 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28810.1 lb13068 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 621C XT include published bucket capacity of 2.36 yd3 / 1.8 m3, published breakout force of 27808.87 lb / 123.7 kN, published operating weight of 28810.1 lb / 13068 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Breakout Force” field (27808.87 lb / 123.7 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.36 yd3 / 1.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.97 yd3 / 1.5 m3) with the specific machine's configuration and records; options and condition can differ.
What changes with this option
Compared with the base Case 621C: 19 of 37 published specifications change.
| Section | Specification | Case 621C | Case 621C XT |
|---|---|---|---|
| Bucket | Breakout Force | 25100 lb / 25100 - | 27808.87 lb / 123.7 kN |
| Bucket | Bucket Capacity - Heaped | 2.32 yd3 / 1.77 m3 | 2.36 yd3 / 1.8 m3 |
| Bucket | Bucket Capacity - Struck | 1.98 yd3 / 1.51 m3 | 1.97 yd3 / 1.5 m3 |
| Dimensions | Hinge Pin - Max Height | 12.14 ft / 3700 mm | 12.7 ft / 3870 mm |
| Engine | Net Power | 130 hp / 97 kw | 130.1 hp / 97.1 kw |
| Engine | Gross Power | 139 hp / 103.7 kw | 139.5 hp / 104 kw |
| Engine | Displacement | 359 cu in / 5.9 L | 359.1 cu in / 5.9 L |
| Engine | Aspiration | turbocharged / turbocharged | Turbocharged / Turbocharged |
| Operational | Operating Weight | 26713.5 lb / 12117 kg | 28810.1 lb / 13068 kg |
| Operational | Hydraulic System Fluid Capacity | 40.5 gal / 153.3 L | 40.5 gal / 153 L |
| Operational | Cooling System Fluid Capacity | 7.1 gal / 26.5 L | 6.9 gal / 26.1 L |
| Operational | Front Axle/Diff Fluid Capacity | 5.5 gal / 20.8 L | 2.6 gal / 9.5 L |
| Operational | Rear Axle/Diff Fluid Capacity | 5.5 gal / 20.8 L | 2.6 gal / 9.5 L |
| Operational | Operating Voltage | 24 V / 24 V | 12 V / 12 V |
| Operational | Tire Size | 20.5-25 L3 / 20.5-25 L3 | 20.5 R25 / 20.5 R25 |
| Transmission | Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation / 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation | Mechanical w/ electronic control / Mechanical w/ electronic control |
| Hydraulic System | Pump Flow Capacity | 18.6 gal/min / 70.5 L/min | 61.6 gal/min / 233.1 L/min |
| Hydraulic System | Dump Time | 1.5 sec / 1.5 sec | 1.7 sec / 1.7 sec |
| Hydraulic System | Lower Time | 5 sec / 5 sec | 4.4 sec / 4.4 sec |
Published only for this option
| Section | Specification | Imperial | Metric |
|---|---|---|---|
| Dimensions | Transport Height- Maximum | 10695.54 ft | 3260 m |
| Dimensions | Transport Length, Maximum | 23654.86 ft | 7210 m |
| Dimensions | Transport Width | 8333.34 ft | 2540 m |
| Engine | Compression Ratio | 17.5:1 | 17.5:1 |
| Engine | Torque | 424.8 lb ft | 575.9 Nm |
| Engine | Bore | 4.1 in | 102 mm |
| Engine | Stroke | 4.8 in | 120 mm |
Not published for this option: Dump Clearance At Max Raise, Length With Bucket On Ground, Reach At Max Lift And Dump, Engine Make, Max Torque, Static Tipping Weight, Rear Axle Oscillation, Max Speed - Forward, Max Speed - Reverse, Relief Valve Setting, Pump Type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.