- Dump Clearance At Max Raise: 9.06 ft / 2757 mm
- Bucket Capacity - Heaped: 2.5 yd3 / 1.92 m3
- Bucket Capacity - Struck: 2.12 yd3 / 1.63 m3
- Bucket Width: 8.1 ft / 2468 mm
Published dimensions and weight
Case 521D
The Case 521D is a wheel loader of about 10 t, built around the Family III 445TA/M2, Tier II certified engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight22109 lb10028 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 521D include published bucket capacity of 2.5 yd3 / 1.92 m3, published breakout force of 20951 lb, published operating weight of 22109 lb / 10028 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.06 ft / 2757 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.5 yd3 / 1.92 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.12 yd3 / 1.63 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.06 ft2757 mm
Bucket Capacity - Heaped2.5 yd31.92 m3
Bucket Capacity - Struck2.12 yd31.63 m3
Bucket Width8.1 ft2468 mm
Breakout Force20951 lb_ -
Dimensions
Ground Clearance1.24 ft377 mm
Length With Bucket On Ground22.01 ft6707 mm
Width Over Tires7.58 ft2308 mm
Height To Top Of Cab10.41 ft3173 mm
Wheelbase9.03 ft2750 mm
Hinge Pin - Max Height11.82 ft3603 mm
Reach At Max Lift And Dump3.47 ft1056 mm
Engine
Number Of Cylinders44
Engine Make22392239
Engine ModelFamily III 445TA/M2, Tier II certifiedFamily III 445TA/M2, Tier II certified
Net Power110 hp82 kw
Gross Power119 hp89 kw
Power Measured @2000 rpm2000 rpm
Max Torque336 lb ft455 Nm
Displacement275 cu in4.5 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbocharged and AftercooledTurbocharged and Aftercooled
Torque Rise14 %14 %
Operational
Operating Weight22109 lb10028 kg
Fuel Capacity50 gal189 L
Hydraulic System Fluid Capacity30 gal113.6 L
Engine Oil Fluid Capacity3.4 gal12.5 L
Cooling System Fluid Capacity5.8 gal22 L
Transmission Fluid Capacity5 gal18.9 L
Front Axle/Diff Fluid Capacity5.9 gal22 L
Rear Axle/Diff Fluid Capacity5.9 gal22 L
Static Tipping Weight18424 lb8357 kg
Turning Radius16.3 ft4947 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5x2517.5x25
Transmission
Transmission Type4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.4 mph37.6 km/h
Max Speed - Reverse15.2 mph24.5 km/h
Hydraulic System
Relief Valve Setting2750 psi18961 kPa
Pump Flow Capacity35.4 gal/min134 L/min
Raise Time5.6 sec5.6 sec
Dump Time1.1 sec1.1 sec
Lower Time3.7 sec3.7 sec
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.