- Dump Clearance At Max Raise: 8.65 ft / 2635 mm
- Bucket Capacity - Heaped: 1.44 yd3 / 1.11 m3
- Bucket Capacity - Struck: 1.18 yd3 / 0.91 m3
- Bucket Width: 6.89 ft / 2100 mm
Published dimensions and weight
Case 321E
The Case 321E pairs the BF4M2011 tier 2 certified engine (72 hp) with an operating weight near 5.9 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight12676 lb5896 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 321E include published bucket capacity of 1.44 yd3 / 1.11 m3, published breakout force of 11241 lb / 50 kN, published operating weight of 12676 lb / 5896 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.65 ft / 2635 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.44 yd3 / 1.11 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.18 yd3 / 0.91 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.65 ft2635 mm
Bucket Capacity - Heaped1.44 yd31.11 m3
Bucket Capacity - Struck1.18 yd30.91 m3
Bucket Width6.89 ft2100 mm
Breakout Force11241 lb50 kN
Dimensions
Ground Clearance1.08 ft330 mm
Length With Bucket On Ground18.88 ft5755 mm
Width Over Tires6.49 ft1978 mm
Height To Top Of Cab9.14 ft2785 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height11.35 ft3459 mm
Reach At Max Lift And Dump2.92 ft888 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelBF4M2011 tier 2 certifiedBF4M2011 tier 2 certified
Net Power72 hp53.5 kw
Gross Power75 hp56 kw
Power Measured @2300 rpm2300 rpm
Max Torque195 lb ft265 Nm
Displacement190 cu in3.2 L
Torque Measured @1600 rpm1600 rpm
Torque Rise9 %9 %
Operational
Operating Weight12676 lb5896 kg
Fuel Capacity26.4 gal100 L
Hydraulic System Fluid Capacity19.5 gal74 L
Engine Oil Fluid Capacity2.7 gal10 L
Front Axle/Diff Fluid Capacity2.2 gal8 L
Rear Axle/Diff Fluid Capacity2.2 gal8 L
Static Tipping Weight9744 lb4420 kg
Turning Radius13.6 ft4132 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size405/70 R20405/70 R20
Transmission
Transmission TypeHydrostaticHydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3626 psi25000 kPa
Pump Flow Capacity19.3 gal/min73 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump Typeopen centered pressure/flow compensatedopen centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.