- Dump Clearance At Max Raise: 8.73 ft / 2659 mm
- Bucket Capacity - Heaped: 1.44 yd3 / 1.11 m3
- Bucket Capacity - Struck: 1.21 yd3 / 0.92 m3
- Bucket Width: 6.89 ft / 2100 mm
Published dimensions and weight
Case 321D
The Case 321D is a wheel loader of about 5.9 t; its BF4M2011 engine is rated at 72 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight13028 lb5909.5 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 321D include published bucket capacity of 1.44 yd3 / 1.11 m3, published breakout force of 15921 lb / 70.83 kN, published operating weight of 13028 lb / 5909.5 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.73 ft / 2659 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.44 yd3 / 1.11 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.21 yd3 / 0.92 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.73 ft2659 mm
Bucket Capacity - Heaped1.44 yd31.11 m3
Bucket Capacity - Struck1.21 yd30.92 m3
Bucket Width6.89 ft2100 mm
Breakout Force15921 lb70.83 kN
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground18.15 ft5531 mm
Width Over Tires6.49 ft1978 mm
Height To Top Of Cab9.14 ft2785 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height10.98 ft3344 mm
Reach At Max Lift And Dump2.92 ft889 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelBF4M2011BF4M2011
Net Power72 hp53.7 kw
Gross Power75 hp56 kw
Power Measured @2300 rpm2300 rpm
Max Torque158 lb ft214.3 Nm
Displacement190 cu in3.2 L
Torque Measured @1600 rpm1600 rpm
Torque Rise9 %9 %
Operational
Operating Weight13028 lb5909.5 kg
Fuel Capacity26.5 gal100 L
Hydraulic System Fluid Capacity18.5 gal70 L
Engine Oil Fluid Capacity2 gal7.5 L
Cooling System Fluid Capacity3.5 gal13 L
Front Axle/Diff Fluid Capacity1 gal3.7 L
Rear Axle/Diff Fluid Capacity1 gal3.7 L
Static Tipping Weight9495.4 lb4307 kg
Turning Radius13.6 ft4132 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size405/70 R20405/70 R20
Transmission
Transmission Typehydrostatichydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3335 psi159.7 kPa
Pump Flow Capacity19 gal/min72 L/min
Raise Time6.6 sec6.6 sec
Dump Time1.1 sec1.1 sec
Lower Time3.5 sec3.5 sec
Pump Typeopen-centered pressure/flow compensatedopen-centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.